> Ken in Kailua-Kona wrote: > I need suggestions. I'm leaning towards another identical module. > Simple to learn obviously. But have a few questions > > 1. How will I be able to hear both modules through headphones? Is > there a device that combines both outputs to a single? > > 2. If I get a different module with different sounds can the two > modules "share" sounds via MIDI? (I am MIDI ignorant...very!) > > Ken, > You have several options: 1. Run the output of one module into the Aux-in on the front of the second module, and then use the output of the headphones on the second module to listen to it all. The problem with this is getting the volume balanced between the two modules and (I asssume) the output of the music you are playing to. 2. Run the output of the modules through a small mixer. 3. Use a trigger module like the TMC-6 to connect your addition pads to and run midi to the first module to trigger sounds in the module. (I have never used one, but I am sure there are other members here that could help you, if you go that route.) I have three DTxpressII modules on my kit. I chose to go the mixer route, because it gave me better control of the volume levels between my modules and the music source I was playing to. I could also use the same sounds across all modules (I have 8 toms, 3 toms on mod. 1, 2 toms on mod. 2 and 3 toms on mod. 3). There is a photo of my kit in the photo album under "OldGuyDrummer". All the pads on the left rack are on module 1, the center is on module 2 and the right rack is on module 3. This was neccessary to eliminate cross-talk between the pads. OGD ************************************************************************** The information transmitted herewith is sensitive information intended only for use to the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon, this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer. ________________________________________________________________________ This email has been scanned for all viruses by the MessageLabs Email Security System. For more information on a proactive email security service working around the clock, around the globe, visit http://www.messagelabs.com ________________________________________________________________________
Message
RE: [DTXpress] Need multiple modules help!!
2003-11-21 by rdamon@mckinney-usa.com
Attachments
- No local attachments were found for this message.