Remember that the hi hat is actually
4 triggers in one, if memory serves. You have "open",
"closed", "heal splash", and a closing hi hat
sound.
both
"open" and "closed" can have different rejection settings I
use 0 for self rejection and rejection (no rejection at all) as you increase the
numbers you increase the delay between the last signal and next. A Self
Rejection value above 3 won't allow buzz rolls or flams, and having a high
Rejection value (from all the other kit) may give problems because the pad will
not recognise any hit occurring with any other pad hit (like a hi-hat and snare
hit together). Do remember to set all the hi hat voices onto one group, so
that only one sound can be heard at any time, that way closing the hi hat cuts
off the open sound just like the real thing.
Hope that helps, can't give you any factory
settings, but if you need to you could choose a default trigger setup from the
trigger menu and write down all the values from there.
-----Original Message-----
From: Boehmer, Scott A. (PSI Net) <Scott.Boehmer.PSINet@...>
To: 'DTXpress list' <DTXpress@egroups.com>
Date: 18 January 2001 21:23
Subject: [DTXpress] Double Trigger Problem
From: Boehmer, Scott A. (PSI Net) <Scott.Boehmer.PSINet@...>
To: 'DTXpress list' <DTXpress@egroups.com>
Date: 18 January 2001 21:23
Subject: [DTXpress] Double Trigger Problem
I am having trouble with double triggers in my high hat trigger. I changed the self-rejection as well as the rejection in the trigger menu and for the whole kit as well and can't seem to get back to original configuration. Can someone tell me which setting I need to change to get back to where I started from? I can't remember if in the rejection settings if the "0" is more time between triggers or 1-9 is the delay.
Thanks for any input that you an give.
Scott from North Carolina!
Community email addresses:
Post message: DTXpress@onelist.com
Subscribe: DTXpress-subscribe@onelist.com
Unsubscribe: DTXpress-unsubscribe@onelist.com
List owner: DTXpress-owner@onelist.com
Shortcut URL to this page:
http://www.onelist.com/community/DTXpress