You need to have the rack look something like this when you have finished
http://www.edrumming.com/gallery/Gunnys-Album/Drums180304_014
I have used a rigid but flexable tubing that I have split all the way along
so that the cables can be put in and come out at different points.
For the Bass Drum Question.
See this http://home.btconnect.com/The-Fire-Service/zimagesnick/drum1.htm
you can use parts of this idea or the snare idea it is up to you but that is
the best way to do it. If you need to ask any questions email me direct.
Gunny
-----Original Message-----
From: jrl49@... [mailto:jrl49@...]
Sent: 07 May 2004 04:17
To: DTXpress@yahoogroups.com
Subject: Re: [DTXpress] Re: wires cords, cords, wires everywhere
Hi Jon: I run the wires coming from my floor tom, up the side rack, and
use a tie wrap, then I do the same for the tom, toms, continuing to go to
the left, then down to the floor. At that point, they should all be hanging
from the module to the floor, and then I use a three to four foot mesh,
which I found in bestbuy, and wrap the wires, so that they are all together.
The tie wraps, help to clean up any loose wires around the rack. Its not
perfect, but alot better then it was before. Also for the cymbals I tie
wrap them down the shaft.
Good Luck, and let me know if I helped, Jerry
Community email addresses:
Post message: DTXpress@yahoogroups.com
Subscribe: DTXpress-subscribe@yahoogroups.com
Unsubscribe: DTXpress-unsubscribe@yahoogroups.com
List owner: DTXpress-owner@yahoogroups.com
Shortcut URL to this page:
http://groups.yahoo.com/group/DTXpress
Alternate DTXpress site:
http://www.dtxpressions.com
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/DTXpress/
b.. To unsubscribe from this group, send an email to:
DTXpress-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.Message
RE: [DTXpress] Re: wires cords, cords, wires everywhere
2004-05-07 by nicholas.gunn@btconnect.com
Attachments
- No local attachments were found for this message.