Yamaha DTXpress/DTXplorer/DTXtreme

That looks very neat - you should be able to get that "concertina" 
hose from the DIY store ?
The new DTXIII comes with all the wires pre tiewrapped in 1 big 
bundle with each wire breaking off from the main loom just before the 
pad - they also supply a bag of velcro wraps to fasten it all to the 
frame - AND there are proper plastic labels on the end so fitting and 
removing take less than a minute. All very neat

Andy



--- In DTXpress@yahoogroups.com, <nicholas.gunn@b...> wrote:
> You need to have the rack look something like this when you have 
finished
> 
> http://www.edrumming.com/gallery/Gunnys-Album/Drums180304_014
> 
> I have used a rigid but flexable tubing that I have split all the 
way along
> so that the cables can be put in and come out at different points.
> 
> 
> For the Bass Drum Question.
> 
> See this http://home.btconnect.com/The-Fire-
Service/zimagesnick/drum1.htm
> 
> you can use parts of this idea or the snare idea it is up to you 
but that is
> the best way to do it. If you need to ask any questions email me 
direct.
> 
> Gunny
> 
>   -----Original Message-----
>   From: jrl49@a... [mailto:jrl49@a...]
>   Sent: 07 May 2004 04:17
>   To: DTXpress@yahoogroups.com
>   Subject: Re: [DTXpress] Re: wires cords, cords, wires everywhere
> 
> 
>   Hi Jon:  I run the wires coming from my floor tom, up the side 
rack, and
> use a tie wrap, then I do the same for the tom, toms, continuing to 
go to
> the left, then down to the floor.  At that point, they should all 
be hanging
> from the module to the floor, and then I use a three to four foot 
mesh,
> which I found in bestbuy, and wrap the wires, so that they are all 
together.
> The tie wraps, help to clean up any loose wires around the rack.  
Its not
> perfect, but alot better then it was before.  Also for the cymbals 
I tie
> wrap them down the shaft.
> 
>   Good Luck,  and let me know if I helped,  Jerry
> 
> 
>   Community email addresses:
>     Post message: DTXpress@yahoogroups.com
>     Subscribe:    DTXpress-subscribe@yahoogroups.com
>     Unsubscribe:  DTXpress-unsubscribe@yahoogroups.com
>     List owner:   DTXpress-owner@yahoogroups.com
> 
>   Shortcut URL to this page:
>     http://groups.yahoo.com/group/DTXpress
> 
>   Alternate DTXpress site:
>     http://www.dtxpressions.com
> 
> 
> 
> --------------------------------------------------------------------
--------
> --
>   Yahoo! Groups Links
> 
>     a.. To visit your group on the web, go to:
>     http://groups.yahoo.com/group/DTXpress/
> 
>     b.. To unsubscribe from this group, send an email to:
>     DTXpress-unsubscribe@yahoogroups.com
> 
>     c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service.