--- In DTXpress@yahoogroups.com, "coopman14" <Coopman14@a...> wrote:
>
> Hello,
>
> I'm looking for help with a problem I just started having about a
week
> ago. I have the dtx II's and use the dual cymbal for my ride/2nd
> crash. Lately, the ride will work fine for a couple minutes, but
then
> get real quiet or not respond at all. As I play it, it play at the
> right volume on some hits, quiet on some, and not respond at all on
> others...there's no way to know what sound I'll get. Obviously this
> is a pretty big problem, as I need to be able to rely on my pads when
> I hit them. Any feedback would be much appreciated.
For starters, you can try another cable and, if the problem persists,
clean the contact inside the jack (a Q-tip with WD-40 would work). If
worst comes to worst, you can open up the cymbal and check for loose
wires, cracked solder (sometimes people resolder even without evidence
of cracking, because it's not always visible), etc. Take a look at
OGD's dissected pics of the cymbal's interior in our Photo section for
a view of what you might encounter. To rule out the unlikely event
that something is seriously wrong with the input electronically, try
another component in it.
Ed
Ed
