How to set a Roland SPD6 to my DTXPRESS?
2006-11-10 by akadien33
I have a Roland SPD6 that I wish to use as extra triggers for my DTXPRESS. Besides the MIDI cable, I have no clue on how to set it up, can anyone help me out? ThanX Fred
Thread
How to set a Roland SPD6 to my DTXPRESS?
Re: How to set a Roland SPD6 to my DTXPRESS?
2006-11-11 by parebele
hi. i have a malletKat midi'd into a dtxpress II, so this might work. assuming you've hooked the midi cables up correctly (out from the spd6, in to the dtxpress), then set the dtxpress to send on midi channel 10. any other channel will get you gm midi sounds (pianos, etc.) set the spd6 to receive on midi channel ten. that should get you percussion sounds. then assign sounds you want to hear to the midi note numbers (0-127, c-2 to G8). then assign a midi note number to each pad on the spd6. voila. again, i have no experience with the spd6 so you'll have to figure out how to assign different sounds to different pads. but i have a malletKAT and a PTX-8 midi'd into my dtxpressII and this method works fine. cheers, parebele--- In DTXpress@yahoogroups.com, "akadien33" <akadien33@...> wrote:
Show quoted textHide quoted text
> > I have a Roland SPD6 that I wish to use as extra triggers for my > DTXPRESS. Besides the MIDI cable, I have no clue on how to set it up, > can anyone help me out? > ThanX > Fred >
RE : [DTXpress] Re: How to set a Roland SPD6 to my DTXPRESS?
2006-12-14 by Fred Fournier
P,
Thanks for your response. How do you configure your DTXpress module so that your malletKat "talks" to your module? That's where I'm a bit confuse.
Fred
parebele a \ufffdcrit :
Thanks for your response. How do you configure your DTXpress module so that your malletKat "talks" to your module? That's where I'm a bit confuse.
Fred
parebele a \ufffdcrit :
Show quoted textHide quoted text
hi. i have a malletKat midi'd into a dtxpress II, so this might work. assuming you've
hooked the midi cables up correctly (out from the spd6, in to the dtxpress), then set the
dtxpress to send on midi channel 10. any other channel will get you gm midi sounds
(pianos, etc.) set the spd6 to receive on midi channel ten. that should get you percussion
sounds. then assign sounds you want to hear to the midi note numbers (0-127, c-2 to
G8). then assign a midi note number to each pad on the spd6. voila. again, i have no
experience with the spd6 so you'll have to figure out how to assign different sounds to
different pads. but i have a malletKAT and a PTX-8 midi'd into my dtxpressII and this
method works fine.
cheers,
parebele--- In DTXpress@yahoogroups.com, "akadien33" wrote:
>
> I have a Roland SPD6 that I wish to use as extra triggers for my
> DTXPRESS. Besides the MIDI cable, I have no clue on how to set it up,
> can anyone help me out?
> ThanX
> Fred
>
Community email addresses:
Post message: DTXpress@yahoogroups.com
Subscribe: DTXpress-subscribe@yahoogroups.com
Unsubscribe: DTXpress-unsubscribe@yahoogroups.com
List owner: DTXpress-owner@yahoogroups.com
Shortcut URL to this page:
http://groups.yahoo.com/group/DTXpress
Alternate DTXpress site:
http://www.dtxpressions.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/DTXpress/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/DTXpress/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:DTXpress-digest@yahoogroups.com
mailto:DTXpress-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
DTXpress-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Personnalisez Yahoo! \ufffd votre go\ufffdt Essayez Mon Yahoo!