Yamaha DTXpress/DTXplorer/DTXtreme

Hello there,
I want to plug two tp 65 on the 9/10 trigger. I bought an Y splitter 
with one stereo male jack on one side and two mono female jack on the 
other.
I plug the two tp 65 five on the Y splitter and  plug the splitter in 
the 9/10 trigger. I only get one sound from both (it's the trigger nine 
for both).
If I use the mono jack from kp 65 (kick) and I plug it into 9/10,  I 
get the two correct sounds.

What's wrong with the Y splitter ?

Another thing, did someone built the keith's circuit, the one that gave 
the same thing than the 9/10 trigger on the other trigger. If yes, is 
it possible to someone to build a couple of them for me, i buy them of 
course.

Thank in advance
Vincent

The splitter must be a TRS (Tip/Ring/Sleeve) male that plugs into the
module and a TS (Tip/Sleeve) and a RS (Ring/Sleeve) on the other end.
They are listed as a "insert" cable. The cable you have must just be a
stereo to stereo splitter. 

 

http://www.thomann.de/gb/the_sssnake_ypp2010.htm

 

Here is one.

 

OGD

 

 

________________________________

From: DTXpress@yahoogroups.com [mailto:DTXpress@yahoogroups.com] On
Behalf Of xaronv
Sent: Saturday, March 10, 2007 2:50 PM
To: DTXpress@yahoogroups.com
Subject: [DTXpress] Problem with 9/10 Trigger

 

Hello there,
I want to plug two tp 65 on the 9/10 trigger. I bought an Y splitter 
with one stereo male jack on one side and two mono female jack on the 
other.
I plug the two tp 65 five on the Y splitter and plug the splitter in 
the 9/10 trigger. I only get one sound from both (it's the trigger nine 
for both).
If I use the mono jack from kp 65 (kick) and I plug it into 9/10, I 
get the two correct sounds.

What's wrong with the Y splitter ?

Another thing, did someone built the keith's circuit, the one that gave 
the same thing than the 9/10 trigger on the other trigger. If yes, is 
it possible to someone to build a couple of them for me, i buy them of 
course.

Thank in advance
Vincent


______________________________________________________________________
The information transmitted herewith is sensitive information intended
only for use to the individual or entity to which it is addressed. If
the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon, this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

Thank you Damon for this really fast answer.
I'll buy one asap 

Bye

--- In DTXpress@yahoogroups.com, "Damon, Rob" <rdamon@...> wrote:
>
> The splitter must be a TRS (Tip/Ring/Sleeve) male that plugs into 
the
> module and a TS (Tip/Sleeve) and a RS (Ring/Sleeve) on the other 
end.
> They are listed as a "insert" cable. The cable you have must just 
be a
> stereo to stereo splitter. 
> 
>  
> 
> http://www.thomann.de/gb/the_sssnake_ypp2010.htm
> 
>  
> 
> Here is one.
> 
>  
> 
> OGD
> 
>  
> 
>  
> 
> ________________________________
> 
> From: DTXpress@yahoogroups.com [mailto:DTXpress@yahoogroups.com] On
> Behalf Of xaronv
> Sent: Saturday, March 10, 2007 2:50 PM
> To: DTXpress@yahoogroups.com
> Subject: [DTXpress] Problem with 9/10 Trigger
> 
>  
> 
> Hello there,
> I want to plug two tp 65 on the 9/10 trigger. I bought an Y 
splitter 
> with one stereo male jack on one side and two mono female jack on 
the 
> other.
> I plug the two tp 65 five on the Y splitter and plug the splitter 
in 
> the 9/10 trigger. I only get one sound from both (it's the trigger 
nine 
> for both).
> If I use the mono jack from kp 65 (kick) and I plug it into 9/10, I 
> get the two correct sounds.
> 
> What's wrong with the Y splitter ?
> 
> Another thing, did someone built the keith's circuit, the one that 
gave 
> the same thing than the 9/10 trigger on the other trigger. If yes, 
is 
> it possible to someone to build a couple of them for me, i buy them 
of 
> course.
> 
> Thank in advance
> Vincent
> 
> 
> 
______________________________________________________________________
> The information transmitted herewith is sensitive information 
intended
> only for use to the individual or entity to which it is addressed. 
If
> the reader of this message is not the intended recipient, you are 
hereby notified that any review, retransmission, dissemination, 
distribution, copying or other use of, or taking of any action in 
reliance upon, this information is strictly prohibited. If you have 
received this communication in error, please contact the sender and 
delete the material from your computer.
> 
______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security 
System.
> For more information please visit http://www.messagelabs.com/email 
> 
______________________________________________________________________
>

> Another thing, did someone built the keith's circuit, the one that gave 
> the same thing than the 9/10 trigger on the other trigger. If yes, is 
> it possible to someone to build a couple of them for me, i buy them of 
> course.

Vincent,

Just to clarify things - my circuit is for when you have used inputs 9
and 10 and still want more pads - it sounds like you aren't there yet!
 It allows you to use the 2 zone ability of inputs 1 to 8.  See
dtxpander.com

Keith.

Keith,

You're right, i need your circuit for my own snare pad that i built 
from scratch. i want to have rim and snare sound on one jack.
9/10 is planned to be used for other purposes than rim trigger.
I've planned to build my own hihat pad and a double zone cymbal
(ride,bell). 
So i nead at least 3 pieces of your circuit. (snare, hihat, cymbal).
As i am absolutly bad in electronic, i need someone to do that for 
me. I've tried once and it was a disaster.

thank

Vincent

--- In DTXpress@yahoogroups.com, "Keith" <keith@...> wrote:
>
> 
> > Another thing, did someone built the keith's circuit, the one 
that gave 
> > the same thing than the 9/10 trigger on the other trigger. If 
yes, is 
> > it possible to someone to build a couple of them for me, i buy 
them of 
> > course.
> 
> Vincent,
> 
> Just to clarify things - my circuit is for when you have used 
inputs 9
> and 10 and still want more pads - it sounds like you aren't there 
yet!

>  It allows you to use the 2 zone ability of inputs 1 to 8.  See
> dtxpander.com
> 
> Keith.
>

Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase.

Terry,

I don't have a drawing, but it is fairly straightforward.   You need
two mono sockets and one stereo plug.

Mono 1: socket tip to tip of stereo plug, sleeve to sleeve of stereo
Mono 2: socket tip to RING of stereo plug, sleeve to sleeve of stereo

Keith.

Terry,
I use a  HOSA YPP-117 Y-Cable.  It's two Female 1/4" mono into one Male 
stereo 1/4".  There are some on eBay - probably cheaper than from a 
retail store.

- John

--- In DTXpress@yahoogroups.com, Terry Hartsell <n9vry@...> wrote:
>
> 
> Hello Everyone:  I would like to make my own splitter cable for the 9 
and 10 triggers on the DTXpress 2 so I can use two separate triggers.

> 
> Does anyone have a drawing on how to do this.
> 
> Terry