Yamaha DTXpress/DTXplorer/DTXtreme

hello all,
              i just bought a pintech hyperhat pedal from ebay,and 
can't seem to get it to work with my dtxepress module,i tried this 
using a stereo cable ,and nothing happened, i had hooked up my old 
pedal,and it worked fine,i had the pintech pedal tested and it works 
perfectly,just doesn't seem to want to work on my module,if anyone 
may know if this pedal is compatable with my module or not,i would 
really apreciate any info. that you can give me,thanks for your time

hey thanks for the info. i'll try to contact them ,and see if they could
help me through it,does pintech have a phone # on their site???

thanks again,
                sam
----- Original Message -----

From: "Richard C. MacDonald" <vcrmac1@...>
To: <DTXpress@yahoogroups.com>
Sent: Saturday, October 27, 2001 11:35 AM
Subject: Re: [DTXpress] using the pintech hyperhat with the dtxepress module


> I'm not familiar with that pedal but I do have a Pintech dual-zone pad. I
> had some trouble with settings initially and calling Pintech was very
> helpful.  If you are not in the USA, they'll respond to e-mail. They were
> happy to help and had actually just picked up a DTXpress so they can work
> through the setup problems.
>
> Rick
>
> -----Original Message-----
> From: reva@... <reva@...>
> To: DTXpress@yahoogroups.com <DTXpress@yahoogroups.com>
> Date: Friday, October 26, 2001 11:26 PM
> Subject: [DTXpress] using the pintech hyperhat with the dtxepress module
>
>
> >hello all,
> >              i just bought a pintech hyperhat pedal from ebay,and
> >can't seem to get it to work with my dtxepress module,i tried this
> >using a stereo cable ,and nothing happened, i had hooked up my old
> >pedal,and it worked fine,i had the pintech pedal tested and it works
> >perfectly,just doesn't seem to want to work on my module,if anyone
> >may know if this pedal is compatable with my module or not,i would
> >really apreciate any info. that you can give me,thanks for your time
> >
> >
> >
> >Community email addresses:
> >  Post message: DTXpress@onelist.com
> >  Subscribe:    DTXpress-subscribe@onelist.com
> >  Unsubscribe:  DTXpress-unsubscribe@onelist.com
> >  List owner:   DTXpress-owner@onelist.com
> >
> >Shortcut URL to this page:
> >  http://www.onelist.com/community/DTXpress
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
> Community email addresses:
>   Post message: DTXpress@onelist.com
>   Subscribe:    DTXpress-subscribe@onelist.com
>   Unsubscribe:  DTXpress-unsubscribe@onelist.com
>   List owner:   DTXpress-owner@onelist.com
>
> Shortcut URL to this page:
>   http://www.onelist.com/community/DTXpress
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

I'm not familiar with that pedal but I do have a Pintech dual-zone pad. I
had some trouble with settings initially and calling Pintech was very
helpful.  If you are not in the USA, they'll respond to e-mail. They were
happy to help and had actually just picked up a DTXpress so they can work
through the setup problems.

Rick

-----Original Message-----
From: reva@... <reva@...>
To: DTXpress@yahoogroups.com <DTXpress@yahoogroups.com>
Date: Friday, October 26, 2001 11:26 PM

Subject: [DTXpress] using the pintech hyperhat with the dtxepress module


>hello all,
>              i just bought a pintech hyperhat pedal from ebay,and
>can't seem to get it to work with my dtxepress module,i tried this
>using a stereo cable ,and nothing happened, i had hooked up my old
>pedal,and it worked fine,i had the pintech pedal tested and it works
>perfectly,just doesn't seem to want to work on my module,if anyone
>may know if this pedal is compatable with my module or not,i would
>really apreciate any info. that you can give me,thanks for your time
>
>
>
>Community email addresses:
>  Post message: DTXpress@onelist.com
>  Subscribe:    DTXpress-subscribe@onelist.com
>  Unsubscribe:  DTXpress-unsubscribe@onelist.com
>  List owner:   DTXpress-owner@onelist.com
>
>Shortcut URL to this page:
>  http://www.onelist.com/community/DTXpress
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Hi Sam,
Technical phone number is: (864) 288-5889
Website is: http://www.edrums.com/

Rick
-----Original Message-----
From: reva@... <reva@...>
To: DTXpress@yahoogroups.com <DTXpress@yahoogroups.com>
Date: Saturday, October 27, 2001 8:37 AM
Subject: Re: [DTXpress] using the pintech hyperhat with the dtxepress module


>hey thanks for the info. i'll try to contact them ,and see if they could
>help me through it,does pintech have a phone # on their site???
>
>thanks again,
>                sam
>----- Original Message -----
>From: "Richard C. MacDonald" <vcrmac1@...>
>To: <DTXpress@yahoogroups.com>
>Sent: Saturday, October 27, 2001 11:35 AM
>Subject: Re: [DTXpress] using the pintech hyperhat with the dtxepress
module
>
>
>> I'm not familiar with that pedal but I do have a Pintech dual-zone pad. I
>> had some trouble with settings initially and calling Pintech was very
>> helpful.  If you are not in the USA, they'll respond to e-mail. They were
>> happy to help and had actually just picked up a DTXpress so they can work
>> through the setup problems.
>>
>> Rick
>>
>> -----Original Message-----
>> From: reva@... <reva@...>
>> To: DTXpress@yahoogroups.com <DTXpress@yahoogroups.com>
>> Date: Friday, October 26, 2001 11:26 PM
>> Subject: [DTXpress] using the pintech hyperhat with the dtxepress module
>>
>>
>> >hello all,
>> >              i just bought a pintech hyperhat pedal from ebay,and
>> >can't seem to get it to work with my dtxepress module,i tried this
>> >using a stereo cable ,and nothing happened, i had hooked up my old
>> >pedal,and it worked fine,i had the pintech pedal tested and it works
>> >perfectly,just doesn't seem to want to work on my module,if anyone
>> >may know if this pedal is compatable with my module or not,i would
>> >really apreciate any info. that you can give me,thanks for your time
>> >
>> >
>> >
>> >Community email addresses:
>> >  Post message: DTXpress@onelist.com
>> >  Subscribe:    DTXpress-subscribe@onelist.com
>> >  Unsubscribe:  DTXpress-unsubscribe@onelist.com
>> >  List owner:   DTXpress-owner@onelist.com
>> >
>> >Shortcut URL to this page:
>> >  http://www.onelist.com/community/DTXpress
>> >
>> >Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

>> >
>> >
>>
>>
>>
>> Community email addresses:
>>   Post message: DTXpress@onelist.com
>>   Subscribe:    DTXpress-subscribe@onelist.com
>>   Unsubscribe:  DTXpress-unsubscribe@onelist.com
>>   List owner:   DTXpress-owner@onelist.com
>>
>> Shortcut URL to this page:
>>   http://www.onelist.com/community/DTXpress
>>
>> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>>
>>
>>
>
>
>
>Community email addresses:
>  Post message: DTXpress@onelist.com
>  Subscribe:    DTXpress-subscribe@onelist.com
>  Unsubscribe:  DTXpress-unsubscribe@onelist.com
>  List owner:   DTXpress-owner@onelist.com
>
>Shortcut URL to this page:
>  http://www.onelist.com/community/DTXpress
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

cool; thanks again for the info.
----- Original Message -----
From: "Richard C. MacDonald" <vcrmac1@...>
To: <DTXpress@yahoogroups.com>
Sent: Saturday, October 27, 2001 3:52 PM
Subject: Re: [DTXpress] using the pintech hyperhat with the dtxepress module


> Hi Sam,
> Technical phone number is: (864) 288-5889
> Website is: http://www.edrums.com/
>
> Rick
> -----Original Message-----
> From: reva@... <reva@...>
> To: DTXpress@yahoogroups.com <DTXpress@yahoogroups.com>
> Date: Saturday, October 27, 2001 8:37 AM
> Subject: Re: [DTXpress] using the pintech hyperhat with the dtxepress
module
>
>
> >hey thanks for the info. i'll try to contact them ,and see if they could
> >help me through it,does pintech have a phone # on their site???
> >
> >thanks again,
> >                sam
> >----- Original Message -----
> >From: "Richard C. MacDonald" <vcrmac1@...>
> >To: <DTXpress@yahoogroups.com>
> >Sent: Saturday, October 27, 2001 11:35 AM
> >Subject: Re: [DTXpress] using the pintech hyperhat with the dtxepress
> module
> >
> >
> >> I'm not familiar with that pedal but I do have a Pintech dual-zone pad.
I
> >> had some trouble with settings initially and calling Pintech was very
> >> helpful.  If you are not in the USA, they'll respond to e-mail. They
were
> >> happy to help and had actually just picked up a DTXpress so they can
work
> >> through the setup problems.
> >>
> >> Rick
> >>
> >> -----Original Message-----
> >> From: reva@... <reva@...>
> >> To: DTXpress@yahoogroups.com <DTXpress@yahoogroups.com>
> >> Date: Friday, October 26, 2001 11:26 PM
> >> Subject: [DTXpress] using the pintech hyperhat with the dtxepress
module
> >>
> >>
> >> >hello all,
> >> >              i just bought a pintech hyperhat pedal from ebay,and
> >> >can't seem to get it to work with my dtxepress module,i tried this
> >> >using a stereo cable ,and nothing happened, i had hooked up my old
> >> >pedal,and it worked fine,i had the pintech pedal tested and it works
> >> >perfectly,just doesn't seem to want to work on my module,if anyone
> >> >may know if this pedal is compatable with my module or not,i would
> >> >really apreciate any info. that you can give me,thanks for your time
> >> >
> >> >
> >> >
> >> >Community email addresses:
> >> >  Post message: DTXpress@onelist.com
> >> >  Subscribe:    DTXpress-subscribe@onelist.com
> >> >  Unsubscribe:  DTXpress-unsubscribe@onelist.com
> >> >  List owner:   DTXpress-owner@onelist.com
> >> >
> >> >Shortcut URL to this page:
> >> >  http://www.onelist.com/community/DTXpress
> >> >
> >> >Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >> >
> >> >
> >>
> >>
> >>
> >> Community email addresses:
> >>   Post message: DTXpress@onelist.com
> >>   Subscribe:    DTXpress-subscribe@onelist.com
> >>   Unsubscribe:  DTXpress-unsubscribe@onelist.com
> >>   List owner:   DTXpress-owner@onelist.com
> >>
> >> Shortcut URL to this page:
> >>   http://www.onelist.com/community/DTXpress
> >>
> >> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

> >>
> >>
> >>
> >
> >
> >
> >Community email addresses:
> >  Post message: DTXpress@onelist.com
> >  Subscribe:    DTXpress-subscribe@onelist.com
> >  Unsubscribe:  DTXpress-unsubscribe@onelist.com
> >  List owner:   DTXpress-owner@onelist.com
> >
> >Shortcut URL to this page:
> >  http://www.onelist.com/community/DTXpress
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
> Community email addresses:
>   Post message: DTXpress@onelist.com
>   Subscribe:    DTXpress-subscribe@onelist.com
>   Unsubscribe:  DTXpress-unsubscribe@onelist.com
>   List owner:   DTXpress-owner@onelist.com
>
> Shortcut URL to this page:
>   http://www.onelist.com/community/DTXpress
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Hi,

I think you may have trouble. I have a dtxpress, yamaha hh60, roland 
td8 and pintech hyperhat, so I've tried this.

The 2 pedals basically switch different values of resistance across 
the circuit. the yamaha uses high values, and the pintech uses low 
values, the yamaha moudule is looking for high values and just regard 
the pintech as a short circuit.

So basically they are incompatible, unless pintech can change the 
resistances for you.
Unless you have a brand new pintech, the yamaha is a better pedal 
anyhow.





--- In DTXpress@y..., reva@n... wrote:
> hello all,
>               i just bought a pintech hyperhat pedal from ebay,and 
> can't seem to get it to work with my dtxepress module,i tried this 
> using a stereo cable ,and nothing happened, i had hooked up my old 
> pedal,and it worked fine,i had the pintech pedal tested and it 
works 

> perfectly,just doesn't seem to want to work on my module,if anyone 
> may know if this pedal is compatable with my module or not,i would 
> really apreciate any info. that you can give me,thanks for your time