Yamaha DTXpress/DTXplorer/DTXtreme

Hey Guys,
I have not a clue how to stop this. Ive set all my triggers to where 
its not too bad yet still not enough. Every time i get done on my 
real snare, certian pads want to trigger. i cant have that..LOL

To explain, what Ive have done is custom re-arranged the rack so 
that i have 5 pads scatter stack in 2 rows. Its located just to the 
right of my hit-hat and snare. (I'll do a pic if needed)One pad is 
about 8 inches from the snare and keeps triggering. What do ya'll 
suggest here. My options are limited on moving the rack, its the 
best place to have it and very easy to get to.
Thanks,
Wm

Ok, I finally got around to setting my kit back up in the studio after
tearing it (and the studio!) apart for Halloween FX. I then dug out my
digital camera and took some pics. See them here:

<http://photos.groups.yahoo.com/group/dtxpress/lst?.dir=/New+Drum+Kit+Photos/Vern+(IlusionSYSOP)&.src=gr&.order=&.view=t&.done=http%3a//briefcase.yahoo.com/>

and if it gets mangled by word wrap, here:

http://tinyurl.com/x4si

I just wish I got to play more often.. If you look closely, you can see
the pads aren't even plugged back into the head yet. :::sigh:::

Vern

--
Vern Graner CNE/CNA/SSE    | "If the network is down, then you're
Senior Systems Engineer    | obviously incompetent so why are we
Texas Information Services | paying you? Of course, if the network
http://www.txis.com        | is up, then we obviously don't need
Austin Office 512 328-8947 | you, so why are we paying you?" VLG

Vern, 
Welcome back from the graveyard...

I have also been swamped at work and with the holidays.
I know what you mean.

I tore my down set and crated them up when the Hurricane came 
through. I just got them set back up last weekend and did some 
rearranging of the pads. I setup a three zone hihat that runs off 
one pedal. Took the two other hihat pads and run them off one pedal. 
I patched two PCY65 pads(one on right, one on left) together to 
trigger off one zone that gives me mirrored ride cymbals.(thanks to 
Stewart for that suggestion). I took some new pics this afternoon. 
Will replace the one in my album later on this evening.



OGD

--- In DTXpress@yahoogroups.com, "Vernon Graner" <vern@t...> wrote:
> Ok, I finally got around to setting my kit back up in the studio 
after
> tearing it (and the studio!) apart for Halloween FX. I then dug 
out my
> digital camera and took some pics. See them here:
> 
> 
<http://photos.groups.yahoo.com/group/dtxpress/lst?.dir=/New+Drum+Kit
+Photos/Vern+(IlusionSYSOP)&.src=gr&.order=&.view=t&.done=http%
3a//briefcase.yahoo.com/>
> 
> and if it gets mangled by word wrap, here:
> 
> http://tinyurl.com/x4si
> 
> I just wish I got to play more often.. If you look closely, you 
can see

> the pads aren't even plugged back into the head yet. :::sigh:::
> 
> Vern
> 
> --
> Vern Graner CNE/CNA/SSE    | "If the network is down, then you're
> Senior Systems Engineer    | obviously incompetent so why are we
> Texas Information Services | paying you? Of course, if the network
> http://www.txis.com        | is up, then we obviously don't need
> Austin Office 512 328-8947 | you, so why are we paying you?" VLG

Ok, so to address the "cuteness" factor, I added some pictures of my 17
month old duaghter Samantha to the gallery... She's gunna make a heckuva
drummer some day! :D

Vern

Vernon Graner said:

> Ok, I finally got around to setting my kit back up in the studio after
> tearing it (and the studio!) apart for Halloween FX. I then dug out my
> digital camera and took some pics. See them here:
>
> <http://photos.groups.yahoo.com/group/dtxpress/lst?.dir=/New+Drum+Kit+Photos/Vern+(IlusionSYSOP)&.src=gr&.order=&.view=t&.done=http%3a//briefcase.yahoo.com/>
>
> and if it gets mangled by word wrap, here:
>
> http://tinyurl.com/x4si
>
> I just wish I got to play more often.. If you look closely, you can see
> the pads aren't even plugged back into the head yet. :::sigh:::
>
> Vern
>
> --
> Vern Graner CNE/CNA/SSE    | "If the network is down, then you're
> Senior Systems Engineer    | obviously incompetent so why are we
> Texas Information Services | paying you? Of course, if the network
> http://www.txis.com        | is up, then we obviously don't need
> Austin Office 512 328-8947 | you, so why are we paying you?" VLG
>
>
>
> Community email addresses:
>   Post message: DTXpress@yahoogroups.com
>   Subscribe:    DTXpress-subscribe@yahoogroups.com
>   Unsubscribe:  DTXpress-unsubscribe@yahoogroups.com
>   List owner:   DTXpress-owner@yahoogroups.com
>
> Shortcut URL to this page:
>   http://groups.yahoo.com/group/DTXpress
>
> Alternate DTXpress site:
>   http://www.dtxpressions.com
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Ok, so I went to setup my kit and it looks like it did a factory reset
(static or something?) so now I have to do the "reset the hi-hat settings
that Yamaha screwed up" and I can't *find* the steps anywhere! If someone
can send it to me I'll post it on dtxpressions.com links or FAQ or
something...

ADVthanxANCE!

Vern

-- 
Vern Graner CNE/CNA/SSE    | "If the network is down, then you're
Senior Systems Engineer    | obviously incompetent so why are we
Texas Information Services | paying you? Of course, if the network
http://www.txis.com        | is up, then we obviously don't need
Austin Office 512 328-8947 | you, so why are we paying you?" VLG

Hi guys!

I just uploaded my drums to the folder Stephanie.

Stephanie

Vern,


Press Shift-Trig to get to trigger setup.
Tap the snare pad.
Page down to "SpecRej" screen for Input 2-snare 

The first number is the level of rejection, the second is the pad 
being rejected (or ignored) by the snare pad. So try:

SpecRej=4 to 8 {4 is rejection level , 8 is the pad being rejected 
(ignored)}

Tap the hihat pad.
Set SpecRej=4 to 2

Now test it. If the snare still doesn't sound when the hihat is hit, 
lower the SpecRej down for the triggers. If the snare triggers the 
hihat then raise the SpecRej up.

The idea is to lower the SpecRej number to the lowest number that 
you can without creating crosstriggering.

OGD
P
--- In DTXpress@yahoogroups.com, "Vernon Graner" <vern@t...> wrote:
> Ok, so I went to setup my kit and it looks like it did a factory 
reset
> (static or something?) so now I have to do the "reset the hi-hat 
settings
> that Yamaha screwed up" and I can't *find* the steps anywhere! If 
someone

> can send it to me I'll post it on dtxpressions.com links or FAQ or
> something...
> 
> ADVthanxANCE!
> 
> Vern
> 
> -- 
> Vern Graner CNE/CNA/SSE    | "If the network is down, then you're
> Senior Systems Engineer    | obviously incompetent so why are we
> Texas Information Services | paying you? Of course, if the network
> http://www.txis.com        | is up, then we obviously don't need
> Austin Office 512 328-8947 | you, so why are we paying you?" VLG

hi,
I'm new to DTXPress and the module it's not
mine....I'd like to use it for live performances with
a real acoustic drum. I need it just to permit my
drummer to sound some samples without need of a synth
and a synth man.
My question is: Is this little device able to play
custom samples...How can i edit or build new syx
files?
thanx for patience....


Bye

______________________________________________________________________
Yahoo! Mail: 6MB di spazio gratuito, 30MB per i tuoi allegati, l'antivirus, il filtro Anti-spam
http://it.yahoo.com/mail_it/foot/?http://it.mail.yahoo.com/

--- In DTXpress@yahoogroups.com, Denis Brk <ainvar@y...> wrote:
> hi,
> I'm new to DTXPress and the module it's not
> mine....I'd like to use it for live performances with
> a real acoustic drum. I need it just to permit my
> drummer to sound some samples without need of a synth
> and a synth man.
> My question is: Is this little device able to play
> custom samples...How can i edit or build new syx
> files?
> thanx for patience....

Denis,

If you mean, will the DTXpress module download samples from elsewhere 
for playback, the answer is no. It plays only its own samples, as 
modified by its own parameters. You can, however, use the module to 
access samples via MIDI by connecting the pads but bypassing the 
module's internal sound(s). Clavia's ddrum and Alesis' DM Pro modules 
will accept samples, but the next wave of offerings from all of the 
major manufacturers is expected to be more accommodating in that 
respect than anything currently on the market. If you already have 
the DTXpress, I would suggest that you or your drummer get to know 
what it does; it may well have voices that will satisfy your needs.

Ed

Thanx for answering.

What i need is a module able to play samples when i
hit the pad. Samples I would use are special FX or
some guitar riff i sampled from my guitar.
I told me bad news :(!
The good news is that i didn't spend any euro for
that:)
So, i think that's a goodbye for this newsgroup, cuz i
joined just to ask this minimal infos.

Thanx for help:)

Byebye


 --- emf <liberatusvirus@...> ha scritto: > ---
In DTXpress@yahoogroups.com, Denis Brk
> <ainvar@y...> wrote:
> > hi,
> > I'm new to DTXPress and the module it's not
> > mine....I'd like to use it for live performances
> with
> > a real acoustic drum. I need it just to permit my
> > drummer to sound some samples without need of a
> synth
> > and a synth man.
> > My question is: Is this little device able to play
> > custom samples...How can i edit or build new syx
> > files?
> > thanx for patience....
> 
> Denis,
> 
> If you mean, will the DTXpress module download
> samples from elsewhere 
> for playback, the answer is no. It plays only its
> own samples, as 
> modified by its own parameters. You can, however,
> use the module to 
> access samples via MIDI by connecting the pads but
> bypassing the 
> module's internal sound(s). Clavia's ddrum and
> Alesis' DM Pro modules 
> will accept samples, but the next wave of offerings
> from all of the 
> major manufacturers is expected to be more
> accommodating in that 
> respect than anything currently on the market. If
> you already have 
> the DTXpress, I would suggest that you or your
> drummer get to know 
> what it does; it may well have voices that will
> satisfy your needs.
> 
> Ed
> 
>  

______________________________________________________________________
Yahoo! Mail: 6MB di spazio gratuito, 30MB per i tuoi allegati, l'antivirus, il filtro Anti-spam
http://it.yahoo.com/mail_it/foot/?http://it.mail.yahoo.com/

So will this also take care of the "hi-hat too quiet" problem or is there
another few steps to add to this? (Since I'm planning to post this to the
DTXpressions FAQ, I figure I might as well be thorough!)

:)

Vern

--
Vern Graner CNE/CNA/SSE    | "If the network is down, then you're
Senior Systems Engineer    | obviously incompetent so why are we
Texas Information Services | paying you? Of course, if the network
http://www.txis.com        | is up, then we obviously don't need
Austin Office 512 328-8947 | you, so why are we paying you?" VLG




oldguydrummer said:

> Vern,
>
>
> Press Shift-Trig to get to trigger setup.
> Tap the snare pad.
> Page down to "SpecRej" screen for Input 2-snare
>
> The first number is the level of rejection, the second is the pad
> being rejected (or ignored) by the snare pad. So try:
>
> SpecRej=4 to 8 {4 is rejection level , 8 is the pad being rejected
> (ignored)}
>
> Tap the hihat pad.
> Set SpecRej=4 to 2
>
> Now test it. If the snare still doesn't sound when the hihat is hit,
> lower the SpecRej down for the triggers. If the snare triggers the
> hihat then raise the SpecRej up.
>
> The idea is to lower the SpecRej number to the lowest number that
> you can without creating crosstriggering.
>
> OGD
> P
> --- In DTXpress@yahoogroups.com, "Vernon Graner" <vern@t...> wrote:
>> Ok, so I went to setup my kit and it looks like it did a factory
> reset
>> (static or something?) so now I have to do the "reset the hi-hat
> settings
>> that Yamaha screwed up" and I can't *find* the steps anywhere! If
> someone
>> can send it to me I'll post it on dtxpressions.com links or FAQ or
>> something...
>>
>> ADVthanxANCE!
>>
>> Vern
>>
>> --
>> Vern Graner CNE/CNA/SSE    | "If the network is down, then you're
>> Senior Systems Engineer    | obviously incompetent so why are we
>> Texas Information Services | paying you? Of course, if the network
>> http://www.txis.com        | is up, then we obviously don't need
>> Austin Office 512 328-8947 | you, so why are we paying you?" VLG
>
>
>
> Community email addresses:
>   Post message: DTXpress@yahoogroups.com
>   Subscribe:    DTXpress-subscribe@yahoogroups.com
>   Unsubscribe:  DTXpress-unsubscribe@yahoogroups.com
>   List owner:   DTXpress-owner@yahoogroups.com
>
> Shortcut URL to this page:
>   http://groups.yahoo.com/group/DTXpress
>
> Alternate DTXpress site:
>   http://www.dtxpressions.com
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

The other alternate is to move the hihat pad to the "alternate" location,
which the same tube that the module is located on.
Clearly, the key is "How hard do you hit?", If you have a light touch then
adjusting the cross-triggering setting should take care of it. If you are a
heavy hitter then the only solution may be to move the hihat pad to the
other location. 

OGD

> -----Original Message-----
> From:	Vernon Graner [SMTP:vern@...]
> Sent:	Monday, December 01, 2003 11:10 AM
> To:	DTXpress@yahoogroups.com
> Subject:	Re: [DTXpress] Re: Arg! Reset FAQ.... where?
> 
> So will this also take care of the "hi-hat too quiet" problem or is there
> another few steps to add to this? (Since I'm planning to post this to the
> DTXpressions FAQ, I figure I might as well be thorough!)
> 
> :)
> 
> Vern
> 
> --
> Vern Graner CNE/CNA/SSE     | "If the network is down, then you're
> Senior Systems Engineer     | obviously incompetent so why are we
> Texas Information Services | paying you? Of course, if the network
> <http://www.txis.com>         | is up, then we obviously don't need
> Austin Office 512 328-8947 | you, so why are we paying you?" VLG
> 
> 
> 
> 
> oldguydrummer said:
> > Vern,
> >
> >
> > Press Shift-Trig to get to trigger setup.
> > Tap the snare pad.
> > Page down to "SpecRej" screen for Input 2-snare
> >
> > The first number is the level of rejection, the second is the pad
> > being rejected (or ignored) by the snare pad. So try:
> >
> > SpecRej=4 to 8 {4 is rejection level , 8 is the pad being rejected
> > (ignored)}
> >
> > Tap the hihat pad.
> > Set SpecRej=4 to 2
> >
> > Now test it. If the snare still doesn't sound when the hihat is hit,
> > lower the SpecRej down for the triggers. If the snare triggers the
> > hihat then raise the SpecRej up.
> >
> > The idea is to lower the SpecRej number to the lowest number that
> > you can without creating crosstriggering.
> >
> > OGD
> > P
> > --- In DTXpress@yahoogroups.com, "Vernon Graner" <vern@t...> wrote:
> >> Ok, so I went to setup my kit and it looks like it did a factory
> > reset
> >> (static or something?) so now I have to do the "reset the hi-hat
> > settings
> >> that Yamaha screwed up" and I can't *find* the steps anywhere! If
> > someone
> >> can send it to me I'll post it on dtxpressions.com links or FAQ or
> >> something...
> >>
> >> ADVthanxANCE!
> >>
> >> Vern
> >>
> >> --
> >> Vern Graner CNE/CNA/SSE     | "If the network is down, then you're
> >> Senior Systems Engineer     | obviously incompetent so why are we
> >> Texas Information Services | paying you? Of course, if the network
> >> <http://www.txis.com>         | is up, then we obviously don't need
> >> Austin Office 512 328-8947 | you, so why are we paying you?" VLG
> >
> >
> >
> > Community email addresses:
> >    Post message: DTXpress@yahoogroups.com
> >    Subscribe:     DTXpress-subscribe@yahoogroups.com
> >    Unsubscribe:   DTXpress-unsubscribe@yahoogroups.com
> >    List owner:    DTXpress-owner@yahoogroups.com
> >
> > Shortcut URL to this page:
> >    <http://groups.yahoo.com/group/DTXpress>
> >
> > Alternate DTXpress site:
> >    <http://www.dtxpressions.com>
> >
> > Your use of Yahoo! Groups is subject to
> <http://docs.yahoo.com/info/terms/>
> >
> >
> >
> 
> 
> 
> Yahoo! Groups Sponsor	 
> ADVERTISEMENT
> click here
> <http://rd.yahoo.com/SIG=12cc7stuk/M=267637.4116732.5333197.1261774/D=egro
> upweb/S=1705031972:HM/EXP=1070381411/A=1853619/R=0/*http://www.netflix.com
> /Default?mqso=60178356&partid=4116732>	
>  
> <http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupm
> ail/S=:HM/A=1853619/rand=985590769>	
> 
> Community email addresses:
>    Post message: DTXpress@yahoogroups.com
>    Subscribe:     DTXpress-subscribe@yahoogroups.com
>    Unsubscribe:   DTXpress-unsubscribe@yahoogroups.com
>    List owner:    DTXpress-owner@yahoogroups.com
> 
> Shortcut URL to this page:
>    <http://groups.yahoo.com/group/DTXpress>
> 
> Alternate DTXpress site:
>    <http://www.dtxpressions.com> 
> 
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/>. 
> ________________________________________________________________________
> This email has been scanned for all viruses by the MessageLabs Email
> Security System. For more information on a proactive email security
> service working around the clock, around the globe, visit
> <http://www.messagelabs.com>
> ________________________________________________________________________
> 
 
**************************************************************************
The information transmitted herewith is sensitive information intended only
for use to the individual or entity to which it is addressed. If the reader
of this message is not the intended recipient, you are hereby notified that
any review, retransmission, dissemination, distribution, copying or other
use of, or taking of any action in reliance upon, this information is
strictly prohibited. If you have received this communication in error,
please contact the sender and delete the material from your computer.

________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs Email
Security System. For more information on a proactive email security
service working around the clock, around the globe, visit
http://www.messagelabs.com
________________________________________________________________________

No, the cross-trigger issue wasn't what I was referencing. I was
referring to the common complaint that the hi-hat volume level, in
*general* is much lower than the rest of the kit when struck with more or
less equal force.

I had tweaked *something* in my search that had brought the level up to
something reasonable, but I can't remember what. Dang. You don't use
something for even a month or two and blammo... all the knowledge /skills
evaporate. Nutz.

Vern

-- 
Vern Graner CNE/CNA/SSE    | "If the network is down, then you're
Senior Systems Engineer    | obviously incompetent so why are we
Texas Information Services | paying you? Of course, if the network
http://www.txis.com        | is up, then we obviously don't need
Austin Office 512 328-8947 | you, so why are we paying you?" VLG




rdamon@... said:

> The other alternate is to move the hihat pad to the "alternate" location,
> which the same tube that the module is located on.
> Clearly, the key is "How hard do you hit?", If you have a light touch
> then
> adjusting the cross-triggering setting should take care of it. If you are
> a
> heavy hitter then the only solution may be to move the hihat pad to the
> other location.
>
> OGD
>
>> -----Original Message-----
>> From:	Vernon Graner [SMTP:vern@...]
>> Sent:	Monday, December 01, 2003 11:10 AM
>> To:	DTXpress@yahoogroups.com
>> Subject:	Re: [DTXpress] Re: Arg! Reset FAQ.... where?
>>
>> So will this also take care of the "hi-hat too quiet" problem or is
>> there
>> another few steps to add to this? (Since I'm planning to post this to
>> the
>> DTXpressions FAQ, I figure I might as well be thorough!)
>>
>> :)
>>
>> Vern
>>
>> --
>> Vern Graner CNE/CNA/SSE     | "If the network is down, then you're
>> Senior Systems Engineer     | obviously incompetent so why are we
>> Texas Information Services | paying you? Of course, if the network
>> <http://www.txis.com>         | is up, then we obviously don't need
>> Austin Office 512 328-8947 | you, so why are we paying you?" VLG
>>
>>
>>
>>
>> oldguydrummer said:
>> > Vern,
>> >
>> >
>> > Press Shift-Trig to get to trigger setup.
>> > Tap the snare pad.
>> > Page down to "SpecRej" screen for Input 2-snare
>> >
>> > The first number is the level of rejection, the second is the pad
>> > being rejected (or ignored) by the snare pad. So try:
>> >
>> > SpecRej=4 to 8 {4 is rejection level , 8 is the pad being rejected
>> > (ignored)}
>> >
>> > Tap the hihat pad.
>> > Set SpecRej=4 to 2
>> >
>> > Now test it. If the snare still doesn't sound when the hihat is hit,
>> > lower the SpecRej down for the triggers. If the snare triggers the
>> > hihat then raise the SpecRej up.
>> >
>> > The idea is to lower the SpecRej number to the lowest number that
>> > you can without creating crosstriggering.
>> >
>> > OGD
>> > P
>> > --- In DTXpress@yahoogroups.com, "Vernon Graner" <vern@t...> wrote:
>> >> Ok, so I went to setup my kit and it looks like it did a factory
>> > reset
>> >> (static or something?) so now I have to do the "reset the hi-hat
>> > settings
>> >> that Yamaha screwed up" and I can't *find* the steps anywhere! If
>> > someone
>> >> can send it to me I'll post it on dtxpressions.com links or FAQ or
>> >> something...
>> >>
>> >> ADVthanxANCE!
>> >>
>> >> Vern
>> >>
>> >> --
>> >> Vern Graner CNE/CNA/SSE     | "If the network is down, then you're
>> >> Senior Systems Engineer     | obviously incompetent so why are we
>> >> Texas Information Services | paying you? Of course, if the network
>> >> <http://www.txis.com>         | is up, then we obviously don't need
>> >> Austin Office 512 328-8947 | you, so why are we paying you?" VLG
>> >
>> >
>> >
>> > Community email addresses:
>> >    Post message: DTXpress@yahoogroups.com
>> >    Subscribe:     DTXpress-subscribe@yahoogroups.com
>> >    Unsubscribe:   DTXpress-unsubscribe@yahoogroups.com
>> >    List owner:    DTXpress-owner@yahoogroups.com
>> >
>> > Shortcut URL to this page:
>> >    <http://groups.yahoo.com/group/DTXpress>
>> >
>> > Alternate DTXpress site:
>> >    <http://www.dtxpressions.com>
>> >
>> > Your use of Yahoo! Groups is subject to
>> <http://docs.yahoo.com/info/terms/>
>> >
>> >
>> >
>>
>>
>>
>> Yahoo! Groups Sponsor
>> ADVERTISEMENT
>> click here
>> <http://rd.yahoo.com/SIG=12cc7stuk/M=267637.4116732.5333197.1261774/D=egro
>> upweb/S=1705031972:HM/EXP=1070381411/A=1853619/R=0/*http://www.netflix.com
>> /Default?mqso=60178356&partid=4116732>
>>
>> <http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupm
>> ail/S=:HM/A=1853619/rand=985590769>
>>
>> Community email addresses:
>>    Post message: DTXpress@yahoogroups.com
>>    Subscribe:     DTXpress-subscribe@yahoogroups.com
>>    Unsubscribe:   DTXpress-unsubscribe@yahoogroups.com
>>    List owner:    DTXpress-owner@yahoogroups.com
>>
>> Shortcut URL to this page:
>>    <http://groups.yahoo.com/group/DTXpress>
>>
>> Alternate DTXpress site:
>>    <http://www.dtxpressions.com>
>>
>> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
>> <http://docs.yahoo.com/info/terms/>.
>> ________________________________________________________________________
>> This email has been scanned for all viruses by the MessageLabs Email
>> Security System. For more information on a proactive email security
>> service working around the clock, around the globe, visit
>> <http://www.messagelabs.com>
>> ________________________________________________________________________
>>
>
> **************************************************************************
> The information transmitted herewith is sensitive information intended
> only
> for use to the individual or entity to which it is addressed. If the
> reader
> of this message is not the intended recipient, you are hereby notified
> that
> any review, retransmission, dissemination, distribution, copying or other
> use of, or taking of any action in reliance upon, this information is
> strictly prohibited. If you have received this communication in error,
> please contact the sender and delete the material from your computer.
>
> ________________________________________________________________________
> This email has been scanned for all viruses by the MessageLabs Email
> Security System. For more information on a proactive email security
> service working around the clock, around the globe, visit
> http://www.messagelabs.com
> ________________________________________________________________________
>
>
> Community email addresses:
>   Post message: DTXpress@yahoogroups.com
>   Subscribe:    DTXpress-subscribe@yahoogroups.com
>   Unsubscribe:  DTXpress-unsubscribe@yahoogroups.com
>   List owner:   DTXpress-owner@yahoogroups.com
>
> Shortcut URL to this page:
>   http://groups.yahoo.com/group/DTXpress
>
> Alternate DTXpress site:
>   http://www.dtxpressions.com
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

On Sun November 30 2003 9:27 pm, Stephanie Ellison wrote:
>  Hi guys!
>
> I just uploaded my drums to the folder Stephanie.

Ahh!  Oh no!  My drums are gone!  Where are they? 

(Vern taps on my shoulder)  Hun, you uploaded them to the group this 
morning...  

Oh...  Can I please have my drums back? (looking sheepish)

Stephanie

--- In DTXpress@yahoogroups.com, Stephanie Ellison 
<deafdrummer@a...> wrote:
> On Sun November 30 2003 9:27 pm, Stephanie Ellison wrote:
> >  Hi guys!
> >
> > I just uploaded my drums to the folder Stephanie.
> 
> Ahh!  Oh no!  My drums are gone!  Where are they? 
> 
> (Vern taps on my shoulder)  Hun, you uploaded them to the group 
this 
> morning...  
> 
> Oh...  Can I please have my drums back? (looking sheepish)
> 
> Stephanie

Stephanie,

Where did you put them in the Photos section or in the files section 
and when? I get email logs that tell me when files have been added 
to the photos/files section and didn't get one on your file being 
added.

So I just created a sub-folder under Files...UserKits...Stephanie's 
Kits for you to put you saved kit's...please try again.

Thanks.
OGD

> Stephanie,
>
> Where did you put them in the Photos section or in the files section
> and when? I get email logs that tell me when files have been added
> to the photos/files section and didn't get one on your file being
> added.
>
> So I just created a sub-folder under Files...UserKits...Stephanie's
> Kits for you to put you saved kit's...please try again.

Vern, you playing tricks on me?  Oh I see them, I uploaded them last night 
instead of the pics to a another yamaha-related web site.  Sorry for the 
confusion.  I promise not to stuff the drums through the monitor again.  
Sorry...

Stephanie

PS.  You took my e-mail a little too literally. ;-)

Gulp...Help? Anyone???


--- In DTXpress@yahoogroups.com, "William" <buoymaster@c...> wrote:
> Hey Guys,
> I have not a clue how to stop this. Ive set all my triggers to 
where 
> its not too bad yet still not enough. Every time i get done on my 
> real snare, certian pads want to trigger. i cant have that..LOL
> 
> To explain, what Ive have done is custom re-arranged the rack so 
> that i have 5 pads scatter stack in 2 rows. Its located just to 
the 

> right of my hit-hat and snare. (I'll do a pic if needed)One pad is 
> about 8 inches from the snare and keeps triggering. What do ya'll 
> suggest here. My options are limited on moving the rack, its the 
> best place to have it and very easy to get to.
> Thanks,
> Wm

Someone may have already chimed in on this, but I'll post an Idea
anyway.. :)

How about placing a MIDI trigger on the snare itself, assign it to no
voice at all and ony using it for rejection/specific rejection? If you
did this, you would be able to "mute" the pads that are too close and
that are being false triggered... just a thought...

-- 
Vern Graner CNE/CNA/SSE    | "If the network is down, then you're
Senior Systems Engineer    | obviously incompetent so why are we
Texas Information Services | paying you? Of course, if the network
http://www.txis.com        | is up, then we obviously don't need
Austin Office 512 328-8947 | you, so why are we paying you?" VLG

William said:

> Gulp...Help? Anyone???
>
>
> --- In DTXpress@yahoogroups.com, "William" <buoymaster@c...> wrote:
>> Hey Guys,
>> I have not a clue how to stop this. Ive set all my triggers to
> where
>> its not too bad yet still not enough. Every time i get done on my
>> real snare, certian pads want to trigger. i cant have that..LOL
>>
>> To explain, what Ive have done is custom re-arranged the rack so
>> that i have 5 pads scatter stack in 2 rows. Its located just to
> the
>> right of my hit-hat and snare. (I'll do a pic if needed)One pad is
>> about 8 inches from the snare and keeps triggering. What do ya'll
>> suggest here. My options are limited on moving the rack, its the
>> best place to have it and very easy to get to.
>> Thanks,
>> Wm
>
>
>
> Community email addresses:
>   Post message: DTXpress@yahoogroups.com
>   Subscribe:    DTXpress-subscribe@yahoogroups.com
>   Unsubscribe:  DTXpress-unsubscribe@yahoogroups.com
>   List owner:   DTXpress-owner@yahoogroups.com
>
> Shortcut URL to this page:
>   http://groups.yahoo.com/group/DTXpress
>
> Alternate DTXpress site:
>   http://www.dtxpressions.com
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>