Digital BW, The Print

I think Paul wrote a short piece in one of his papers about making sure you have 
plenty of ink before you start the printing process. Keep in mind that if you 
work in the tradition of working prints you will print several times before you 
are satisfied. Eveything is on track and all of a sudden there very odd missing 
tones or splattering. Check your ink levels. When everything else fails common 
sense, check the cartridges. 





________________________________
From: Rusty Sterling <rustysterling@...>
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Sent: Sat, February 26, 2011 12:03:33 PM
Subject: [Digital BW] Re: Newbie Here

  
Phillip: Thanks for that tip. I haven't received my MIS carts yet but I will 
keep that in mind down the road.

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Phillip Kimble 
<grimmieoldfart@...> wrote:
>
> Rusty,
> 
> If you are using MIS ink & carts, when you start seeing excessive globs of 
>Black 
>
> ink, refill. 
> 
> 
> I thought the most oddest thing was when the cart started running low it 
> actually "spits" more ink out than normally expected.
> 
> 
> 
> 
> ________________________________
> From: Rusty Sterling <rustysterling@...>
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Sent: Fri, February 25, 2011 7:09:24 PM
> Subject: [Digital BW] Re: Newbie Here
> 
> Â  
> Thanks Clayton. Actually, I already read all of your articles, including the 
>one 
>
> you just referenced. Good stuff. 
> 
> 
> For now I am just printing BO with stock cartridges on my R200 with pretty good 
>
> results. I was getting some slight banding but I changed the black cartridge 
> today and now I'm not getting any perceptible (but I haven't looked through a 
> loupe).
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "ClaytonJ" <cj@> wrote:
> >
> > 
> > 
> > Hello Rusty,
> > 
> > Welcome to the forum.
> > 
> > >...I'm turning my old Epson R200 into a strictly B&W printer using an inkset 
>
> >from MIS. I'm starting with the neutral tone inkset and will explore the warm 

> >tone set later. 
> >
> > 
> > The R200 is an excellent printer. I got several years of good service out of 

> >one but it finally died and went the way of all things (now using an R2400 
>with 
>
> >ABW).
> > 
> > Please see article #10 at the link below for a variable tone inkset for the 
> >R200 using MIS inks.
> > 
> > 
> > Regards,
> > Clayton
> > 
> > 
> > Info on black and white digital printing at 
> > http://www.cjcom.net/digiprnarts.htm
> > I-Trak 2.1 http://www.cjcom.net/itrak.htm
> >
> 
> 
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>





      

[Non-text portions of this message have been removed]