Try letting the head sit in Windex (the type with ammonia) for a few hours. That is, move the head to one side by calling for a cleaning cycle. Pull the plug. Flood the parking pad with Windex, and manually move the head back over the parking pad into its usual parking position. Don't plug in the machine for a few hours. Then after it has sat for that length of time, plug it in and let it continue the cleaning cycle. See if that helps.
Paul
On Wed, Oct 7, 2015 at 2:37 PM, 'Sylvain M.' sylvain@... [DigitalBlackandWhiteThePrint] <DigitalBlackandWhiteThePrint@yahoogroups.com> wrote:
Hi all,
After a quite long time without using my 1400 (equiped with Eboni), I had to make a strong service on it: change carts, flush heads. All nozzles came back on track except the K head. After many (and many) tries, I still get absolutely nothing (or some small lines from time to time) from the K head.
I run with 6.3 carts from MIS and "old" Eboni.
Any clue? Help!
Thanks in advance...
--
Sylvain M.