Digital BW, The Print

> I printed a 16 x 20 inch print of my 3000. Instead of the image being 
> 20 inches it is 19 5/8. Can this shortage be linked to the removal of 
> the pizza wheels?

Theres a long list of "issues" related to the 3000 sheet feed.
Quite a few a listed on the piezo support area.

The basic list:

Tensioning springs are too loose
The platen is mis-adjusted
The roller is worn and dry
The thickness adjustment is set incorrectly

Pizza wheels are usually not the problem.

Different paper surfaces act differently.
Different feed methods act differently.
a. front feed
b. rear feed thru slot
c. rear feed straight path
Different thickness setting act differently.

Thanks
Bob