Digital BW, The Print

On 6/11/02 8:02 PM, "Moreno Polloni" <mp@...> wrote:

>> Imageprint doesn't work with the old Cone inks. The cone profiles that
> were
>> in imageprint were just betas and are not good. The only ink set it
> supports
>> today is the MIS FS ink set.  In the next two weeks it will support the
> FS-N
>> inkset and the Piezotones.  The dither is more sensitive and thus each
>> inkset must have its own profiles.    In my opinion the dither is much
> finer
>> than the piezo dither when you use the correct profiles for the ink that
> you
>> are using.
> 
> Have you compared the Piezo and Imageprint dither on the desktop printers?
> 
> 
The dither in imageprint is finer.  Looks like the difference between 400
and 100 ASA film.  I can't say anything definitive about quality yet...the
imageprint profiles are for MIS FS inks only...and I'm not using those.
Hope to have Piezotone and MIS-FS N support in the next week or so...these
are the inks that I'm using and I will report back when I've tried them.

Robert