Digital BW, The Print

Rich,

When you get your Piezo kit there will be a manual on the disk which will
tell you what settings to use in the Epson driver with the Piezo driver.
(This info might be on the Piezo site so you can check there while you
wait.) Once you have these set, just save them as a Custom set. These
settings will work with PiezoTone, MIS-FS, the original Piezo, and MIS-FS
Neutral inks.

In practice because of the differences in hue you will probably wind up
adjusting your images a bit differently for each ink set.

Martin Wesley
http://www.borderless-photos.de/guests.html



----- Original Message -----
From: "lisanrichus" <kamurah@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Tuesday, June 18, 2002 9:08 AM
Subject: [Digital BW] Piezography / MIS compatibility question....?


> Hello all,
>
> I am a new member to this group, but I have been lurking for a
> while and trying to "soak up" as much as I can from your
> knowledgeable heads ;)
>
> (As I write this, I have a Piezography cartridge kit / software (the
> new Piezotone set) on order which should arrive today (taps foot
> waiting for Fedex...)
>
> I also have a set of MIS FS quads on hand that I am thinking is
> what I want to use with the Piezo driver.
>
> (Setup will be used in a 1280 / with EAM)
>
> Question:  The MIS inks I ordered said on the order page they
> were compatible with the Cone driver, but is there anything else I
> will need to do (configuration wise) that will insure proper
> output.?  The MIS site doesn't appear to have any further
> info...nor does the Piezography site (which is understandable
> since they don't recommend anything but Piezo inks)
>
> Any help / thoughts from those of you who have already travelled
> this road is much appreciated.
>
> Thanks, and nice to meet all of you....
>
>
> Rich Green
>
>
>
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep
them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or
"flames."
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various
resources on the homepage.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>