Press the yellow button, this should bring the heads to the left. Unplug the printer. Squirt with a syringe, a mixture of ammonia/water, 1:9 directly into the open nipples of the printhead. Wipe it down, and do it again. Wipe it down, clean the area with q timps, and replace the cartridges. Do about 4 or 5 head cleanings. This SHOULD get you clear printheads. Jerry To clean under the bottom of the printheads: While the cartridges are all the way left, dip a paper towel into the ammonia/water solution, or fantastik, or glass plus, etc. wring out. fold over and over until you get a towel that is about 1 inch by 12 inches. Tuck it into the channel that the print heads run along. Drag the heads back and forth by hand over the towel. Repeat with 2 or 3 more paper towels. This will clean the bottom of the printheads. You'll still have to run about 4 or 5 more headcleanings with the epson software to get everything working normally again. Jerry daintreeriver2002 wrote: > > Hi All, > > Well it\ufffds finally (after 3 weeks) happened to me! I turned on my > Epson 1280 (I'm using MIS VM inks in pre-filled cartridges) and ran a > quick nozzle check, which showed some banding with the black ink. > After doing a head cleaning, the next nozzle check was worse and now, > after 4-5 cleanings with some prints of the purge pattern imbetween, > I'm getting practically nothing! > > I know everyone's written a lot about cleaning the print heads. I'm > a real novice "under the hood" of my printer and don't know exactly > how to go about it. Should I first just let the printer sit overnite? > I printed yesterday just fine, and the cartridges are about 1/2 > full. I'd really appreciate some advice and a list of steps to > follow if I do need to clean the heads myself. (I'm not even sure > how one gets them in the correct position to clean!) > > Thank you! > > Bob > > > Please visit the Group Homepage to check the Files, Bookmarks, Polls and other resources as they are often being updated. The page is at: > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. > > Please follow these basic guidelines: > - Include your full name with your message. > - Include the address of your website, if you have one. > - As threads develop, trim off excess portions of earlier messages to keep them short. > - As the topic of a thread changes remember to change the subject header. > - Good manners are required at all time. No personal attacks or "flames." > - Complete your Yahoo profile. > - Before posting a question, search the message archives and the various resources on the homepage. > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Message
Re: [Digital BW] Clogged Epson 1280
2002-08-27 by Jerry Olson
Attachments
- No local attachments were found for this message.