Digital BW, The Print

Matin:

Martin Wesley wrote:

> When you flushed the ports with Windex did you just push the Windex
> through?
> When I did this I also pulled the syringe back putting suction on the
> ports
> to pull any debris out to the nozzles. You might try this again. Push
> Windex
> through until everything is coming out clean on the paper towel
> underneath.
> Then let the Windex stand in the nozzles for several hours and then
> suction
> it out to get out any chunks that may be too large to go out the other
> side.
> If this back flush is not clean you might want to repeat it.

This finally did the trick, I have been trying to clear this bugger for
over two weeks. I actually used a similar product to Speedball 2000 that
my local janitorial supply house carried and let it set in the head for
24-36 hours. Soaking the pad did little to bust up this clog it was only
by filling the head with the cleaner and letting it sit like I did that
it finally cleared things out.

> Did you try running some Epson carts?

This helped but it did not completely solve the problem. The new Epson
carts cleared everything expect for four nozzles in the black head.

Thanks everyone,
Mark

--
Mark Romine
MARK ROMINE PHOTOGRAPHY
227 Fairway Drive
Bloomington, IL 61701
309-662-4258
http://www.markrominephoto.com



[Non-text portions of this message have been removed]