Digital BW, The Print

What is a modified cartridge clamp?  I'm using an inkjetgoodies CIS system.
There is nothing to hold the cartridges in except the felt pads, what
are you trying to close?

Jerry



Glenn Thureson wrote:
> 
> Jerry,
> 
> I can't push the color cart in as far as the black one -- when I try to push
> it down farther, it flexes the whole cart hold (and, I presume, the heads).
> I'm using the Modified Cartridge Clamps, and the color clamp is a doozy to
> close.  Should I have removed the felt pads?
> 
> Glenn
> 
> ----- Original Message -----
> From: "Jerry Olson" <jerryolson@...>
> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Sent: Thursday, October 03, 2002 3:18 PM
> Subject: Re: [Digital BW] F-16 failure -- new CFS
> 
> > Are the cartridges down far enough to trip the little switch?  Try
> > pulling them up and reseating them. That's almost surely what the
> > problem is.
> >
> > Glenn Thureson wrote:
> > >
> > > I have the VM ink all set up and looking good.  However, when I turned
> on
> > > the
> > > printer (1280), the ink light was on.  So I went through all of the F-16
> > > procedure (as far as I can tell), but to no avail.
> > >
> > > I have gotten successfully through step 3c in the F-16 instructions.
> Step
> > > 3d fails, 1280 ink light still on.  Then I went to Note 1 on page 5.
> Still
> > > no joy.  The ink light remains on.
> > >
> > > And MIS is moving.
> > >
> > > I would appreciate your help.
> > >
> > > Glenn Thureson
> 
> 
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and other resources as they are often being updated. The page is at:
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page.
> 
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or &amp;amp;quot;flames.&amp;amp;quot;
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various resources on the homepage.
> 
> 
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/