Digital BW, The Print

Don:

I swap CFS units on my 1270 between MIS Archival Color and FS-E with 
no problems.  Two things to remember: the more frequently you swap, 
the more likely you are to introduce air into the printheads, and the 
longer a CFS unit is unused, the more likely it is to develop sludge 
in the lines due to the water/solvent permeability of the tygon 
tubes.  

Jeff Randall


--- In DigitalBlackandWhiteThePrint@y..., "donbga" <dsbryant@m...> 
wrote:
> I've been thinking about the possibility of using more than 1 
inkset 
> on one printer. That is to say, currently I use MIS VM quadtones 
with 
> my 1160 using CFS carts. 
> 
> Would it be feasable to set up a different MIS inkset such as the 
VM 
> Sepia with another set of CFS carts, purging the heads when swapped?
> 
> I occasionally have to pull a cart out to get it reprimed every so 
> often, as long as one cart set was left in I would think this 
method 
> would allow flexibility of inksets.
> 
> Thanks,
> 
> Don Bryant