Digital BW, The Print

I believe I've fixed the problem I was having. I'm not sure what the 
cause of the problem was -- perhaps foam in the cartridge or a syphon 
break -- but at any rate I followed Doug Fisher's suggestion 
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/message/282
05 and the next day after running several purges I suddenly started 
getting perfect nozzle checks, no banding etc. 

Chris Hargens 


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Chris Hargens" 
<ldmr@c...> wrote:
> I'm running VM with a CFS on an 1160. I recently installed the new 
> MIS Eboni ink with a new cartridge. No problems at all for the 
first 
> 8 or so prints. Today, some 4 or 5 days after last printing, I 
tried 
> to print. Started with a nozzle check -- perfect. When I started to 
> printed, however, I noticed about halfway through that terrible 
> banding was beginning to take place, as well as some small blotches 
> and pools of ink on the print. I stopped the printing and ran a 
> nozzle check. It looked pretty bad. I then ran a cleaning cycle -- 
no 
> help. I ran two more, still the same. Looking at the nozzle check, 
I 
> see that it is not always the same lines that are missing. It 
almost 
> seems random. What I'd be interested in learning is whether ink 
> pooling/blotching can occur with a foam problem or air-in-the-
> cartridge problems, or is it a sign of something else. BTW I ran 
> several purges -- no help. Also, I would get a good nozzle check 
and 
> then that would be followed by bad one, almost seeming random. 
> Perhaps I should follow Robert Morrison's advice to someone else 
and 
> just not use the printer for a few days? Any help would be 
> appreciated.
> 
> Chris Hargens