Thanks for the information! I'm going to try to look for a norwegian or scandinavian company that sells the rods, otherwise I'll have to make an international order I guess. -- Daniel Staver http://daniel.staver.no > -----Original Message----- > From: Antonis Ricos [mailto:antonisphoto@...] > Sent: 1. juni 2003 03:11 > To: DigitalBlackandWhiteThePrint@yahoogroups.com > Subject: [Digital BW] Re: First attempt at coating > > > Daniel, > > try rods such as... > http://www.buschmancorp.com/wirewound.asp. > http://www.rdspecialties.com/labs.htm > http://www.eepjon.com/Rods.htm > > Ask Robert Morrison (on this list) for more details. > > > Also look at: > http://www.ijsupplies.com/ij-clear-coatings.html > > Good luck going after the holy grail! > > > Antonis. > > > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Daniel Staver" > <daniel@p...> wrote: > > I just made my first attempt at coating a print using the following > > procedure: > > > > - 2 layers of Golden Soft Gel (Gloss) brushed on with one > hour drying > > time between the two coats. > > > > - 2 layers of Golden Polymer Varnish with UVLS (Gloss) also > brushed on > > with one hour drying time between coats. > > > > My first impression is that this looks really beautiful. Sure I got > > visible brush streaks from the first coat, and lots of dust on the > > print, but the blacks are much, much better, and I feel the picture > > got some extra 'punch' that wasn't there before. It's got the deep > > blacks of glossy papers with the texture and archivability > of fine art > > matte papers - Seems like a great combination to me. > > > > I measured the uncoated black to 2.54 and coated to 2.85 on > EAM. This > > should only be about 2% difference, but in reality it looks much > > greater. Holding an uncoated black patch against the coated print > > makes the patch look very gray, not black. > > > > Next time I'm going to try a roll instead of a brush for the first > > coat, and do the coating in my bathroom instead of my dusty > carpeted > > room. > > > > This was very encouraging, I'm really looking forward to doing more > > experiments now! > > > > -- > > Daniel Staver > > http://daniel.staver.no > > > ------------------------ Yahoo! Groups Sponsor > ---------------------~--> Get A Free Psychic Reading! Your > Online Answer To Life's Important Questions. > http://us.click.yahoo.com/Lj3uPC/Me7FAA/ySSFAA> /ucIolB/TM > > > -------------------------------------------------------------- > -------~-> > > Please visit the Group Homepage to check the Files, > Bookmarks, Polls and other resources as they are often being > updated. The page is at: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. Please follow these basic guidelines: - Include your full name with your message. - Include the address of your website, if you have one. - As threads develop, trim off excess portions of earlier messages to keep them short. - As the topic of a thread changes remember to change the subject header. - Good manners are required at all time. No personal attacks or flames - Complete your Yahoo profile. - Before posting a question, search the message archives and the various resources on the homepage. Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Message
RE: [Digital BW] Re: First attempt at coating
2003-06-01 by Daniel Staver
Attachments
- No local attachments were found for this message.