Digital BW, The Print

Carl,

here's a scan of the chart after I set the ink limit to 70:
http://daniel.staver.no/img/qtrcalib1.jpg

Don't mind the measured values I've written there, my densitometer gives
me values totally unlike the values I typically see quoted here, but
seems to work well for linearization anyway.

The paper is EEM and the inks are Ultratones with Eboni black.

--
Daniel Staver
http://daniel.staver.no 

> The partition values seem to be too high.   Do you have a scan of the 
> second calibration chart, with the default ink limit set to 70 so we 
> can see where you set the partition values?  For comparison, take a 
> look at Roy's default 1280-VM-GRAY descriptor file below.