Well, I have been using the cart for a while with no problems. I ran a number of purge patterns and get the right colors, but several are badly banded. I will let the second windex application soak until this evening and try again. I am still unsure of what to do next if that does not work. Thanks. Steve --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "bgs" <bgs@b...> wrote: > You might have a bad cart. I use a CFS....MIS-VM and did have similar type > of problem early in the year. You can run separate squares of each "color" > by putting in the numerical value for each color separately and printing. If > they are not the same as a swab taken from the bottle, the color cart might > be split inside. This is what happened to mine.Bought a new unfilled color > cart from MIS, filled it and it has been fine ever since. These carts will > fail sometimes. I was getting irregular nozzle checks also at that time. Did > you run a purge pattern?......bgs > > P.S.: I still only use warm water on the pad and on folded Bounty if need > be. It was a promise I made to the owner of the service center. I might be > the only Windex bolter! > ----- Original Message ----- > From: "Stephen Kobrin" <skobrin@h...> > To: <DigitalBlackandWhiteThePrint@yahoogroups.com> > Sent: Thursday, August 07, 2003 8:27 AM > Subject: [Digital BW] 1200 clog still there > > > > I put windex on the pad yesterday and left it overnight. There is > > some improvement, but the "yellow" ink is still badly clogged and > > some of the others show problems during a nozzle check. The wierd > > thing is that the nozzle pattern got worse after running a cleaning > > cycle. I have just put a second application of windex on the pad. > > > > If this does not do it, what is the next step. I have found two in > > various places: 1) remove the carts and squirt windex directly into > > the "feed tubes;" or 2) reinstall original Epson carts and see if > > that cleans things out. Unfortunately my orignal Epson carts have > > been sitting for almost a year, so that means I would have to buy at > > least the color cart, as the black seems fine. > > > > I really can't complain since this is the first time since I swiched > > to quad inks last October that I have had a serious problem. > > > > Any help appreciated. > > > > Steve > > > > > > > > Please visit the Group Homepage to check the Files, Bookmarks, Polls and > other resources as they are often being updated. The page is at: > > > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > > > If you wish to receive no emails or just a daily digest, or you wish to > unsubscribe, please edit your Membership preferences by visiting this same > page. > > > > Please follow these basic guidelines: > > - Include your full name with your message. > > - Include the address of your website, if you have one. > > - As threads develop, trim off excess portions of earlier messages to keep > them short. > > - As the topic of a thread changes remember to change the subject header. > > - Good manners are required at all time. No personal attacks or flames > > - Complete your Yahoo profile. > > - Before posting a question, search the message archives and the various > resources on the homepage. > > > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > >
Message
Re: [Digital BW] 1200 clog still there
2003-08-07 by Stephen Kobrin
Attachments
- No local attachments were found for this message.