Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "culturalvisions" 
<fmward@h...> wrote:
> The 2200 with G4 desktop or my G3 iBook does not respond when I try to print 
> from ImagePrint Rip or Quadtone Rip 2.0.  It seems that I am doing something 
> wrong, but I don't know what.  The 2200 woks fine when printing out of OPM 
> or the standard Epson driver.  It even prints through the QTR2 when I have the 
> printing software set on QTR2 Calibrate.  Unfortunately, that setting does not 
> seem to allow for any adjustment.  
> 
> Yes, I've followed the instructions on IP  and QTR2 meticulously and had a 
> friend with both systems installed go through it with me.   I am running OSX 
> 2.6 and everything else seems OK.  Has anybody had this problem?
> 
> Frank
> http://www.culturalvisions.com

Frank,

It sounds like the OS X print system is somehow hungup.  It's very strange
that the calibrate mode would work but not the regular mode.  OPM and
the Epson driver reach the printer in completely different ways -- but at
least their working says your hardware is connected correctly.  I'm not
sure how IP connects through OS X to the printer.

You could check the error_log using Print-Gimp-Errorlog.  This may or
may not give you a hint about what is wrong.

Anyway, my suggestion is to Delete the printer from Print Center and re-add
it.  That will clear out the spooling queues and reinitialize them.  You
will have to run Run-Install-Curves again to get the curves back.

Roy
www.harrington.com