Digital BW, The Print

Pulling the ink through with a syringe means your tubes are not blocked, but
that does not mean your cart is functional. I'd get a new cart & a new tube
from MIS. Strip the old K tube from the CIS/CFS ribbon tubing - you can
attach the new tube to the old tube ribbon with cable ties (not too tight)
or cloth tape. I'd also use the bottom fill method for this new cart (less
chance of introducing foam in the cart).

This is also an opportunity to switch to the more reliable Eboni black.
-BK


----- Original Message ----- 
From: "frankg_photo" <fh.gross@...>
To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
Sent: Saturday, October 04, 2003 10:41 PM
Subject: [Digital BW] Re: 1160 black blocked


> thanks for all the pointers folks.
>
> I have sucked the nozzle with the fat syringe and gottten the black
> ink flow.
>
> I have also tried epson carts with great success - printed the 4 col
> purge pattern properly. And also the regular test pattern.
>
> But when I reconnect the quadtone inkset - back to same problem.
>
> From what you've said it could be dry ink in the tubes ? But then why
> the flow when I pulled it through with a syringe ?
>
> =====================================================================
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Barry Kelsall"
> <bktimes@h...> wrote:
> > Do you know which black you are using? If it is the co-solvent
> black - that
> > ink has a nasty habit of drying out, even inside tubing of a
> CFS/CIS. I
> > tossed my co-solvent black & am now using the Eboni exclusively.
> You have to
> > order it from the UltraTone inkset, or specify it when you phone
> MIS.
> >
> > Checking the 1160 with OEM Epson carts is good advice, too.
> >
> > Good luck,
> > BK
>
>
>
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:
>
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>
> If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.
>
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep
them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or flames
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various
resources on the homepage.
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>