Digital BW, The Print

Thanks, Bob.  Unfortunately none of these symptoms are present.  I'll keep
looking and let you know if I find anything

--Ken

-----Original Message-----
From: Bob Frost [mailto:bobfrost@...]
Sent: Monday, October 20, 2003 1:08 AM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: Re: [Digital BW] Epson install problem after ImagePrint


Ken,

As you may have seen, I'm also having trouble with IP and my 2100. In all
the reading, rebooting, and reinstalling that I've done, I have read that IP
disables your existing Epson driver by various means to avoid conflict with
its own driver. When uninstalling it, using its own uninstaller since it
doesn't use the normal windows Uninstaller for some reason, it seems to
leave a new printer port that it sets up - called
C:\programfiles\iP\spool\printers\Epson 2200. You can delete this by going
to Settings/Printers/yourprinter(1270)/Properties/Ports and checking that
this new port is not there after uninstallation. If it is, delete it in that
menu, and recheck the box opposite your normal port for the 1270. IP's
uninstaller may also leave the printer installed; go to Settings/Printers
and manually delete it if necessary. On at least one occasions it said it
couldn't uninstall all the files, and I had to go to Program Files\IP and
delete the folders manually. I haven't yet looked to see what it might be
leaving in the Registry!

Bob Frost


----- Original Message -----
From: "Ken Carney" <kcarney1@...>


> Would greatly appreciate any advice.  I downloaded the ImagePrint demo,
> liked it, thought I would get it and a new 2200.  However...after
installing
> the demo, my beloved 1270 will only print in one tone with the Epson
> software (the typical red cast), no matter whether the image sent to it is
> cold tone, warm tone or what.  I uninstalled the ImagePrint demo (not easy
> to do), but still the same problem with the 1270.  So I uninstalled the
1270
> as a printer and the Epson software.  I tried to reinstall (the Epson XP
> driver with both USB and parallel), but the Epson software will not
> recognize the printer as installed, though it is installed.  It will print
> with the native XP drivers, but the Epson print software will get to
> "installing your printer" and then hang.  Thanks for any advice on this
> exotic question.  It's time to upgrade, but I would like to keep the 1270.



Please visit the Group Homepage to check the Files, Bookmarks, Polls and
other resources as they are often being updated. The page is at:

http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint

If you wish to receive no emails or just a daily digest, or you wish to
unsubscribe, please edit your Membership preferences by visiting this same
page.

Please follow these basic guidelines:
- Include your full name with your message.
- Include the address of your website, if you have one.
- As threads develop, trim off excess portions of earlier messages to keep
them short.
- As the topic of a thread changes remember to change the subject header.
- Good manners are required at all time. No personal attacks or flames
- Complete your Yahoo profile.
- Before posting a question, search the message archives and the various
resources on the homepage.




Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/