>According to the MIS website, you can replace the Piezotone ink >with MIS FS. (appended below.) The price differential is very >compelling. >--Can I just pour in MIS FS on top of the 1/2" of piezotone ink >remaining in the CIS bottle? I do not recommend mixing MIS UT-FS inks with PiezoTone inks. The bases/binders in which the pigments of these two inksets are suspended are probably much different. You might have precipitation that would clog the system. I would never mix inks that are not from a "family" of compatible inks. Paul www.PaulRoark.com ________________________ http://www.inksupply.com/index1.cfm?source=html/workflow_ne w.html <<FS and FS Neutral for Cone's R9 Driver (Image Export BW by R9)-The MIS FS inks will work with Cone's R9 driver. No special workflow is required when used with this driver. It is a lower cost apporach and the print results are reportedly equal or better. These FS inks are fully pigmented, with pure carbon pigment and they are archival. The performace in cartridges and in contiuous flow systems is identical. These inks do not cause clogging problems, and they do not evaporate when the printer is not being used. They are compatible with the Cone inks and can be substituted one for one with out cleaning or flushing. >> Please visit the Group Homepage to check the Files, and other resources as they are often being updated. http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. Please follow these basic guidelines: - As threads develop, trim off excess portions of earlier messages to keep them short. - Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice. - Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership. - By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See "Group Topic, Rules and Guidelines" in the Files section: http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP. Yahoo! Groups Links
Message
RE: [Digital BW] Replacing Piezotone with MIS FS
2004-03-06 by Paul Roark
Attachments
- No local attachments were found for this message.