Digital BW, The Print

Happened here too. As well as Roy's suggestions try going to page setup 
and selecting it there first, then make sure paper source is right, or 
try a different setting. Then go back and try the driver.

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Roy Harrington" <
roy@h...> wrote:
> 
> I've seen that happen once too.  You are right that the set of options you
> see is just the generic setup.  Its been a while so I don't remember the
> exact circumstances, but I think it was a matter of restarting either the
> program i.e. Quit and Restart Photoshop or possibly logging out and back in.
> Deleting the printer and Re-Adding with no other programs running might
> also help.
> 
> Roy
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "px3n120x" <px3n120x@y...> 
> wrote:
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, William John Smith 
> > <william@g...> wrote:
> > 
> > I tried Epson's new driver for SP 1280 but no improvement. Same with GP, QTR. Here's 
> > what I have in the bottom pull-down menu of the Print dialog:
> > Copies & pages
> > Layout
> > Scheduler
> > Paper handling
> > Colorsync
> > Summary
> > which looks to me like a generic setup to which each printer adds its particular features.
> > 
> > I'm wondering if these options are part of a config file I can check and/or edit.
> > 
> > Andu
> > 
> > > 
> > > 
> > > > Message: 18
> > > >    Date: Thu, 18 Mar 2004 22:13:04 -0000
> > > >    From: "Roy Harrington" <roy@h...>
> > > > Subject: Re: OT Upgrading OSX->10.3 and printing
> > > >
> > > > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "px3n120x"
> > > > <px3n120x@y...> wrote:
> > > >> I did an upgrade to OSX 10.3 and printing (SP 1280) is broken. What 
> > > >> happens is
> > > > that
> > > >> when I chose Print I don't have all the options I used to on OSX 
> > > >> 10.2, I can't choose
> > > >> paper, dpi, etc. or QTR. I did a clean install but didn't help. I 
> > > >> installed on a firewire
> > > >> drive but I doubt installing on the Mac's hard drive would make a 
> > > >> difference,
> > > > basically
> > > >> I want to make sure things work before I mess up with my current 
> > > >> setup on the HD.
> > > >> I'm searching the web for clues, any help would be appreciated.
> > > >>
> > > >> Andu
> > > >
> > > >
> > > > Andu,
> > > >
> > > > OS X 10.3 has quite a few print drivers and it's likely you don't have 
> > > > the one
> > > > you are used to.   I'm not sure which one you really want.  The SP 
> > > > 1280 is
> > > > the standard Epson driver.  In Print Setup Utility when you Add a 
> > > > printer
> > > > make sure you use the "EPSON USB" pull down to find that driver.   If 
> > > > you are
> > > > going to also use QTR you'll need to use <option> Add and the Advanced
> > > > pulldown.
> > > >
> > > > Roy
> > > >
> > > 
> > > Also Epson just released new drivers for both the 1280 and 2200 for OSX.
> > > 
> > > 
> > > [Non-text portions of this message have been removed]