Steve, You might want to try using i1 Share instead of MeasureTool for doing your spot measurements. Carl On Monday, May 3, 2004, at 08:29 PM, Steve Kale wrote: > Here is precisely what I see. When I open Measure Tool it searches > for the > dongle and then says it will operate in limited demo mode. I then > click on > Spot and it asks me to place the device on a white reference. When I > click > ok a window called Spot Measurement opens with Lab selected and > Reference > checked. Underneath reference are the values 80,0 and 0 (54.7, 56.7, > 46.8 > if the colour space is changed to XYZ). These same values appear below > sample. I then select Sample and then take the first measurement. If > I > measure the 100% step on the K ink of the ink separation page I get the > following values below sample (ref values remain unchanged): 49.3, > 49.9, > 32.1 (Lab 76.0, 3.3, 12.6). And this is a very black patch. If I then > measure the 100% patch of the combo ink, ie a dark grey patch) I get > 141.9, > 142.9, 110.7 (Lab 114.7, 5.4, 4.7). Measuring EEM paper white I get > 189.4, > 166.2, 189.0 (Lab 121.4, 33.9, -26.8). > > If at the beginning rather than selecting Sample I click start then > Reference becomes 189.6, 166.3, 189.4 (Lab 121.4, 34.0, -26.9). > Sample is > then checked. Subsequent measures of the same patches and paper white > are > not materially different from the numbers above. > > It is as though the scale is completely out of whack. > > > From: "Roy Harrington" <roy@...> > > I guess I'm still suspicious that you might be looking at the wrong > column.= > > When the spot window first comes up, the Reference column is selected. > So the first click on the device fills in the Reference column, but > immedia= > tely > after the Sample column is selected but no values have been filled in. > So it's in a state where the right column named Sample is selected but > the > values you should be looking at are on the left under Reference. > After this you can continue measuring by clicking the device and the > values= > > will all be under Sample. > > Roy > > > > > [Non-text portions of this message have been removed] > > > > Please visit the Group Homepage to check the Files, and other > resources as they are often being updated. > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish > to unsubscribe, please edit your Membership preferences by visiting > this same page. > > Please follow these basic guidelines: > - As threads develop, trim off excess portions of earlier messages to > keep them short. > - Good manners are required at all time. No personal attacks or > flames. Hostile, aggressive or argumentative users may be removed from > the membership without notice. > - Keep your posts and threads related to the group topic of digital > B&W printing. Users who persistently make off-topic posts may be > removed from the membership. > - By posting on this forum you agree to abide by the group rules and > guidelines, and to abide by the actions and decisions of the group > Owner and Moderators. See „Group Topic, Rules and Guidelines‰ in the > Files section: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE > PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE „OWNER‰ > AND „MODERATORS‰ OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE > LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, > CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, > DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE > LOSSES (EVEN IF THE „OWNER‰ AND „MODERATORS‰ OF DIGITAL BW, THE PRINT > YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), > RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, > THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF > YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD > PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER > MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP. > > Yahoo! Groups Links > > > > >
Message
Re: [Digital BW] Re: Doing soemthing stupidly wrong with i1 spot metering?
2004-05-04 by Carl Schofield
Attachments
- No local attachments were found for this message.