Digital BW, The Print

You could end up with similar issues with Epson inks also. Did you make sure that you 
looked carefully up there around the head and paper feed area to see if there was any ink 
build up there that is transfering to the paper? I've had this issue with Epson inks when 
black ink got built up in the printer and when the paper rubbed across it it transfered to 
the media. You might need a strong light to look up in there.

john


> I am getting quite sick of the problems. Would a UT2 CIS work better
> or worse? Or should I just dump the setup to get a 2200 and stay with
> Epson ink and print with QTR or BlackOnly.. 
> 
> Michael
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "jturner4210626"
> <JTurner421@a...> wrote:
> > 
> > Quick follow up.  I e-mailed tech support at MIS and this was their 
> > reply:
> > 
> > 
> > This problem can be caused by a slightly over filled cartridge. It 
> > does not pose a problem and can usually be cleared by running three 
> > cleaning cycles. You may repeat the process if necessary and you may 
> > also print our purgeblack page to prevent the system from trying to 
> > spray extra ink. 
> >  
> > It wiill clear up by the time you have finished these steps. 
> >  
> > You down load our purge files at this link....
> > http://www.inksupply.info/?_a=downloads