Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "David
Wroblewski" <dawroblewski@y...> wrote:
> 
> No, on the 2200 each chip carries with it the color 
> ink it is for.
> 
> You can only replace a black with a black, etc.
> 
Is that entirely correct. You may well be right, but there are two
parts to ID on the 2200. There is also the little plastic registration
clip. There are 5 variants: (C, LC), LK, (LM,M), (MK, PK), Y. The two
may be independent but it could be a combination of information from
the chip and position is needed. The reuslt is the same though.

John

> d
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "sinwen" 
> <sinwen@f...> wrote:
> > Can you tell if the chip of a Black cart is the same than a Cyan 
> or Magenta cart ?
> > 
> > 
> >   ----- Original Message ----- 
> >   From: Paul Roark 
> >   To: DigitalBlackandWhiteThePrint@yahoogroups.com 
> >   Sent: Friday, January 07, 2005 3:44 AM
> >   Subject: RE: [Digital BW] 2200 chip won't reset
> > 
> > 
> >   Yes, sometimes the chips don't reset.  That is why I recommend 
> people have a
> >   couple extra around so they're not out of business waiting for 
> the next
> >   shipment.
> > 
> >   Paul
> >   www.PaulRoark.com 
> > 
> > 
> >   -----Original Message-----
> >   From: David Wroblewski [mailto:dawroblewski@y...] 
> >   Sent: Thursday, January 06, 2005 4:51 PM
> >   To: DigitalBlackandWhiteThePrint@yahoogroups.com
> >   Subject: [Digital BW] 2200 chip won't reset
> > 
> > 
> > 
> >   I've just switched a cart, using my sk168 chip resetter
> >   to reset the chip. Got a green light and everything on the
> >   resetter, so I thought I was good to go.
> > 
> >   However, it reads out at it's previous level. I've
> >   tried resetting it again several times, same result.
> > 
> >   Does this happen sometimes? That the resetter reports
> >   success but the chip doesn't actually reset? Anyone
> >   have tips to suggest before I break out the exacto 
> >   knife and replace the chip?
> > 
> >   david
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > [Non-text portions of this message have been removed]