Digital BW, The Print

Ok I think you or I are getting confused.  The only issue re swapping ink
cartridges arises with the Epson driver - not QTR.  If you use a Mac and the
Epson driver the procedure I described will avoid you having to delete
printer etc when swapping PK to MK and vice versa.  With QTR, it does NOT
care if you swap.  So you only need QUAD2200 once (as opposed to the Epson
driver where you should have two of all that you use - No Margins, Maximum,
Standard etc).  QUAD2200 can sit happily alongside your twin sets of Epson
drivers - just define the Epson ones first.


> From: krn_ptr <krn_ptr@...>
> Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Date: Fri, 18 Feb 2005 14:45:40 -0000
> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Subject: Re: [Digital BW] PK or MK on QUAD 2200?
> 
> 
> 
> Yeah, thanks for your reply again, Steve.  Unfortunately, the suggested method
> doesn't really seem to apply to the new easy install procedure in v2.1d.
> There 
> is no CurveDropBox anymore that I can find.
> 
> The install automatically sets up a printer which I have now named,
> QUAD2200MK.  You load the curves into that first printer the same way as in
> v2.0, using the terminal launched by the curves installer file. However, there
> doesn't seem to be any way to get the curves into the second Quad printer
> selected in the Printer Setup Utility.
> 
> The good news is that the Epson 2200 Firewire printer I selected in the
> Printer 
> Setup Utility to print colour, does work without having to trash/reinstall the
> printers etc.  So your idea would work if I only knew how to install a second
> QUAD2200PK printer and get the curves loaded.
> 
> peter
>