Digital BW, The Print

Yeah, thanks for your reply again, Steve.  Unfortunately, the suggested method 
doesn't really seem to apply to the new easy install procedure in v2.1d.  There 
is no CurveDropBox anymore that I can find.  

The install automatically sets up a printer which I have now named, 
QUAD2200MK.  You load the curves into that first printer the same way as in 
v2.0, using the terminal launched by the curves installer file. However, there 
doesn't seem to be any way to get the curves into the second Quad printer 
selected in the Printer Setup Utility. 

The good news is that the Epson 2200 Firewire printer I selected in the Printer 
Setup Utility to print colour, does work without having to trash/reinstall the 
printers etc.  So your idea would work if I only knew how to install a second 
QUAD2200PK printer and get the curves loaded.

peter




--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Kale <
stevekale@b...> wrote:
> Ok so go to Printer Setup Utility and delete all the Epson printers.  Insert
> MK cartridge and turn on printer (I use USB so that I can use QTR as well).
> Add the Epson USB 2200 printer (or printers if you want all the driver
> options).  Rename them to denote MK (command i).  Now put in the PK
> cartridge.  Add the printers again - they will have their generic names
> again.  Select each and command i to change their names. That does the 
Epson
> drivers.
> 
> QTR doesn't know nor care whether PK or MK is installed.  So your QTR 
issue
> is independent of switching cartridges.  Check your CurveDropBox and see if
> it contains the .quad files.  Sounds like your profile install didn't work.
> My install of QTR was done some time ago and I am not really familiar with
> Roy's new easy install procedures.
> 
> 
> > From: krn_ptr <krn_ptr@y...>
> > Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > Date: Thu, 17 Feb 2005 23:33:09 -0000
> > To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > Subject: Re: [Digital BW] PK or MK on QUAD 2200?
> > 
> > 
> > 
> > Well, Steve.  I said it was too simple for someone like me...  I can't figure
> > out 
> > how to do what you advised.
> > 
> > I'm on a Mac and the Epson manual says you have to trash your 2200 
printer
> > list.  I tried NOT trashing it, and it didn't work.  I can change the name of
> > the 
> > first printer, but how do you instal the second printer and get profiles into
> > the 
> > driver?  
> > 
> > When I select the printer in the Advanced settings as a QuadToneRip 
2200, it's
> > listed in the printer list, but when I select it in the driver in CS, there
> > are no 
> > profiles with it even though I ran the 2200 profile instal.
> > 
> > peter