Digital BW, The Print

Pete,

Do you have pictures that you could post somewhere or send to Martin for the 
files section?  I'm having trouble visualizing the two modifications you 
mentioned.

Helene


> I had the DDS syndrom which is when your prints lose density in the 3/4 
> tones. That is the ink which is mostly affected by the cart rising. But 
> Manny suggested a fix earlier which was to bypass the CIS cartridges 
> completely and run the tubing directly onto the ink stems. That was an 
> instant cure and I am still using that after about 3 months and have no 
> plans to return to the CIS system.
> 
> I actually am running another Piezo system on a 1200 printer and 
> started it off by drilling holes in the bottle tops, running tubing I 
> bought at a hobby shop which is secured in the middle of my printer 
> with a loose tie-strap attached with foam tape. The trick is to raise 
> the printer about 2 inches higher than the bottles to make up for the 
> 




[Non-text portions of this message have been removed]