Digital BW, The Print

Richard,

I have had serious paper feed problems with my R800, to the point 
where I am sorry I bought it.  I have found that the problems tend to 
be minimized when there is a substantial stack of paper in the feed 
slot.  I am not sure if that will help with your problem, but it does 
seem to minimize, if not eliminate feed issues.

Steve

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, Richard Morton 
<soulman@n...> wrote:
> 
> Greetings,
> 
> I'm using an R800 for printing images with large areas of black and 
> noticing that the printer marks the surface of HPR.
> 
> The marks are made by the D shaped pick up roller on the left hand 
side 
> (opposite the adjustable paper guide) and are only visible if that 
area 
> is black.  Unfortunately most of what I'm currently doing are just 
> that.
> 
> My first R800 died prematurely (due to paper feeding problems as it 
> happens) and it exhibited the same behaviour.  I suspect they would 
all 
> do it to HPR, though neither of them mark EAM but it's really not 
> noticeable unless the area is black.
> 
> Someone suggested I try feeding sheets into the roll feed slot in 
the 
> back but I haven't been able to make that work - can't get the 
paper in 
> the right place.
> 
> Does anyone have any suggestions on how to use sheets in the roll 
feed 
> slot or anything else to try?
> 
> Thanks & cheers,
> 
> Richard Morton