Digital BW, The Print

When I bought my C86, I installed the MIS pre-filled carts without 
ever using the Epson carts.

The MIS inks went FAST, with that 1st set.

Then I bought re-fillable carts and bulk MIS ink. The ink isn't used 
nearly as fast as that first set. Go figure.

I highly recommend re-fillable carts and bulk MIS inks.

If you go that route, let us know and we'll fill you in on what to 
purchase.

Scott


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "morley4now" 
<morley4now@y...> wrote:
> Thanks Scott. I just ran a nozzle test and it still shows problems. 
It
> has been over an hour since the last activity on the printer. The
> carts that I have are new, not refills, so I don't have a bottom-
fill
> adapter. I don't think there is enough ink left the cartridges if I 
did.
> 
> I don't think they were full before installing them.
> 
> Morley 
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com,
> "scott_now_coming" <scott_now_coming@y...> wrote:
> > please read this post:
> > 
> > 
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/message/623
> > 03
> > 
> > 
> > If you still have problems, let me know and I'll try to help.
> > 
> > Scott
> > 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "morley4now" 
> > <morley4now@y...> wrote:
> > > Thank you everybody for your help.  After removing the tape 
over the
> > > vent holes I was able to get ink on paper, but with very 
> > disappointing
> > > results.
> > > 
> > > I have not been able to print a single purging test pattern 
without
> > > serious banding. The nozzle test utility confirms that some of 
the
> > > nozzles are clogged.  I have done at least 12 cleaning cycles 
and
> > > printed 6 test patterns, and NOW I AM ALMOST OUT OF INK. 
> > >