Digital BW, The Print

Scott,
This is exactly my plan, too.  I ordered an initial set of cmy carts 
and 2 Eboni carts to get up an running so I can see how this system 
will work for me. Once I'm satisfied with the output I was planning 
to order the refillables.  Please feel free to post what you feel is 
needed to do this properly. Thanks, Mike Brouphy

--- In 
DigitalBlackandWhiteThePrint@yahoogroups.com, "scott_now_coming" 
<scott_now_coming@y...> wrote:
> When I bought my C86, I installed the MIS pre-filled carts without 
> ever using the Epson carts.
> 
> The MIS inks went FAST, with that 1st set.
> 
> Then I bought re-fillable carts and bulk MIS ink. The ink isn't 
used 
> nearly as fast as that first set. Go figure.
> 
> I highly recommend re-fillable carts and bulk MIS inks.
> 
> If you go that route, let us know and we'll fill you in on what to 
> purchase.
> 
> Scott
> 
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "morley4now" 
> <morley4now@y...> wrote:
> > Thanks Scott. I just ran a nozzle test and it still shows 
problems. 
> It
> > has been over an hour since the last activity on the printer. The
> > carts that I have are new, not refills, so I don't have a bottom-
> fill
> > adapter. I don't think there is enough ink left the cartridges if 
I 
> did.
> > 
> > I don't think they were full before installing them.
> > 
> > Morley 
> > 
> > --- In DigitalBlackandWhiteThePrint@yahoogroups.com,
> > "scott_now_coming" <scott_now_coming@y...> wrote:
> > > please read this post:
> > > 
> > > 
> 
http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/message/623
> > > 03
> > > 
> > > 
> > > If you still have problems, let me know and I'll try to help.
> > > 
> > > Scott
> > > 
> > > --- In 
DigitalBlackandWhiteThePrint@yahoogroups.com, "morley4now" 
> > > <morley4now@y...> wrote:
> > > > Thank you everybody for your help.  After removing the tape 
> over the
> > > > vent holes I was able to get ink on paper, but with very 
> > > disappointing
> > > > results.
> > > > 
> > > > I have not been able to print a single purging test pattern 
> without
> > > > serious banding. The nozzle test utility confirms that some 
of 
> the
> > > > nozzles are clogged.  I have done at least 12 cleaning cycles 
> and
> > > > printed 6 test patterns, and NOW I AM ALMOST OUT OF INK. 
> > > >