Digital BW, The Print

Greg,

If you need a 7000 manual let me know -- if your email will take a 
10mb PDF as an attachment, I can send one to you.

Richard

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "dfaprinting" 
<dfaprinting@y...> wrote:
> I'll take a look at it if you want. You can email me at the 
following:
> 
> greg <AT> dfaprinting <DOT> com (Yahoo always hides the email 
address, 
> so you'll have to put it together). I'm up in central NY so at 
least in 
> the same country.
> 
> I might at least be able to copy the wires from my 9500 To figure 
out 
> which goes where. If you order the motor, I would expect it to come 
> with a new connector on the end of the wire. As far as the 
connector 
> for the board, that might be difficult to obtain from an Epson 
parts 
> place. It could be easy to salvage off of something like and old 
video 
> tape machine (which I have plenty of at my regular job). The big 
> question is what condition the board is in. That might be a little 
> harder to fix. Often with the multi layer boards, component leads 
are 
> used to help bridge connections from one layer to the next. If any 
of 
> those get broken, putting all the connections back together can be 
a 
> real pain (but not impossible).
> 
> I never did check to make sure I have a manual for the 7000, so I 
> prolly better do that.