Digital BW, The Print

Daniel,
This sounds like a problem I had a month or so back.  I had a cyan 
airbrush-like edge next to the top and left of each image about a 
1/4" wide.  I hope your solution is as simple as mine.  I had left 
the paper thickness switch under the cover of my 1270 on + for thick 
paper.  
Hap

> Hello list, 
>  I just set up my NMC CIS on my 1270 w/ MIS Arch.
> Color inks and noticed something strange right away..
> My prints were coming out with a severe cyan
> "overspray" to the left and top of my print's edge.
> 
> I printed some blocks of color to see the range of
> this
> effect. I've posted a scanned print here:
> http://www.tronicart.com/inks/spray.html 
> 
> Most of the overspray occurred on purple, cyan and
> blue
> blocks. There also appears to be some magenta
> overspray. It doesn't seem to happen on black blocks.
> 
> I've run several cleaning cycles to no avail. Nozzle
> checks come up fine, as do alignment checks. I haven't
> tried swapping out w/ an OEM cart, need to buy one.
> Think the one I took out dried already?(since sat.).
> 
> I'm running this system on a PC w/ PhotoShop 6.
> Problem
> also shows up in PhotoShop 5.5.
> 
> I heard this discussed back in the summer, but don't
> remember it ever getting resolved.(he just gave the
> printer away)
> 
> Has this happened to anyone? Did you find a solution?
> 
> Thanks for your help!!
> Daniel Perez
> 
> >note: My MIS VM CIS set on my 1280 is working without problem.
> 
> __________________________________________________
> Do You Yahoo!?
> Send your FREE holiday greetings online!
> http://greetings.yahoo.com