Digital BW, The Print

K2 thanks for the advice.

Has anyone tried the trick of replacing C65 chips with C86 chips? Is this a
common thing to do? I'm really interested in the MIS solution and don't want
to waste (even a small amount of) money on a C65 if I can't get it work.

Geoffrey

-----Original Message-----
From: DigitalBlackandWhiteThePrint@yahoogroups.com
[mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of K2
Chittin
Sent: Tuesday, 5 July 2005 8:15 AM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: Re: [Digital BW] Epson C86 in Australia

It's getting late so my brain is fried.  I just thought of a workaround.

In case you can only get the C86 EZ carts, take off the chips from a used
set of C65 carts, replace the chips on the C86 carts and reset using a chip
resetter.  Be careful to put the chips on the corresponding "colour" as they
are cartridge number specific.

K2

K2 Chittin wrote:

>Geoffrey
>
>The C65 is the Asian/Australasian equivalent of the European/North 
>American C66.  Same goes for the C85 vs C86.  The carts are the same 
>physically but the chips are different.  So you won't be able to use the 
>MIS C86 carts in them.
>
>K2