Digital BW, The Print

Let me make sure I've got this correct.  The first step in the calibration process is now to 
print the inkseparation file using the following setup:

ModeL  QuadTone RIP Calibration
Curve 1: None
Curve 2: None
Tone Blend 100-0
Ink Limit Adj 0
Gamma Adj 0

Is that it?  



--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Roy Harrington" <roy@h...> 
wrote:
> 
> Sorry about the calib confusion -- I haven't used the calib curves for quite a while.  
> 
> One of the major new things in 2.3 is more shared code between Mac and PC.
> 
> Anyway the calib profiles were one of the harder things to explain and the 
> source of more confusion than they were worth.   So one of the things 
> that was added a while ago on the PC side was to just select the Calibration 
> Mode and leave the curves as None.  Then the Blend value is essentially the 
> ink limit used for all the inks.   (you can think of it as Curve1 = 100% and 
> Curve2 = 0% and blend as before). 
> 
> This feature was also ported back to Mac a while ago but with 2.3 the calib
> profiles disappeared altogether.  The new way is so much easier the old
> calib files don't seem to me to be needed.
> 
> Roy