Digital BW, The Print

Paul,
Here is a quick run.  EEM, gamma 1.8, contrast -15, R200 WITH UT7 + FS-Y

Step  Lab   A     B
0.00  97.20 0.80  -4.15 -            b                |  a
L +
5.00  88.01 1.09  -2.96 -                 b           |   a
L       +
10.00 83.94 1.21  -2.34 -                   b         |   a               L
+
15.00 79.35 1.35  -1.92 -                     b       |    a           L
+
20.00 75.64 1.41  -1.52 -                      b      |    a         L
+
25.00 71.95 1.47  -1.37 -                       b     |    a       L
+
30.00 67.91 1.54  -1.05 -                        b    |     a   L
+
35.00 63.98 1.58  -0.83 -                         b   |     a L
+
40.00 60.40 1.61  -0.78 -                         b   |     a
+
45.00 57.08 1.64  -0.83 -                         b   |   L a
+
50.00 53.59 1.63  -0.77 -                         b   | L   a
+
55.00 50.27 1.64  -0.94 -                         b   L     a
+
60.00 47.34 1.58  -1.09 -                        b  L |     a
+
65.00 44.76 1.39  -1.22 -                        bL   |    a
+
70.00 41.94 1.21  -1.22 -                        b    |   a
+
75.00 38.99 0.93  -1.15 -                      L b    |  a
+
80.00 36.44 0.67  -1.17 -                    L   b    | a
+
85.00 34.10 0.58  -1.11 -                   L    b    | a
+
90.00 32.26 0.56  -0.94 -                  L      b   | a
+
95.00 30.15 0.67  -0.44 -                 L         b | a
+
100.0 16.20 0.52  0.62  -        L                    | b
+

Best regards,
John Moody

-----Original Message-----
From: DigitalBlackandWhiteThePrint@yahoogroups.com
[mailto:DigitalBlackandWhiteThePrint@yahoogroups.com]On Behalf Of Paul Roark
Sent: Tuesday, September 06, 2005 8:42 PM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: RE: [Digital BW] r200 with QTR

John,

I have not had time to get back to the R200.  With the cheaper printers the
last 1" is rougher because the heads tend to be "vertical," such that they
are still printing after the paper is outside the main rollers.

How close to neutral and a good ramp is the UT7 + FSY with the Epson driver
and Color Controls checked?  I have not loaded that combination to see how
it'll look with a "EZ" approach.

Paul
www.PaulRoark.com





[Non-text portions of this message have been removed]