Digital BW, The Print

Try this link. Not exactly the same wording but it's the same idea
that the plug is very important.
 
http://www.inksupply.com/c82refill.cfm

colotbat.com has yet another clear cart that has a metal tube which
acts like the CIS tubing. You can consider this one a self contained
CIS without tubing. The fill hole requires no plug so refilling is
somewhat easier. Now can you guess why this color bat cart doesn't
require the plug  :?

--nick

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "John Moody"
<moodymz3@y...> wrote:
>
> Good info, thanks, but that is a spongeless cart.   We are talking
about the
> 2200 carts, which have a sponge.
> 
> Best regards,
> John Moody
> 
> -----Original Message-----
> From: DigitalBlackandWhiteThePrint@yahoogroups.com
> [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com]On Behalf Of
Mike Dobbs
> Sent: Friday, October 28, 2005 7:20 PM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] Re: refilling MISPRO cart for the Epson 2200
(still
> more)
> 
> MIS disagrees:
> 
> From their refill instruction on the spongeless clear carts, step #4:
> "Re-install the rubber plug. Make sure it fits tight. An air leak
> here will let ink drain into your printer. If you think the plug is
> damaged, use a new one. "
> 
> Link to page where you can also see the inner design of the cart:
> 
> < http://www.inksupply.com/spongless_carts.cfm>
> 
> 
> 
> Mike.
> 
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Kale
> <stevekale@b...> wrote:
> >
> > And all the channel does is to catch any spill out of that small
> whole.
> > Plenty of air can get in that little whole if ink is draining out
> the bottom
> > poppet valve.  Air coming in to the cartridge is a symptom not a
> cause.
> >
> >
> > > From: John Moody <moodymz3@y...>
> > > Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > > Date: Fri, 28 Oct 2005 12:06:09 -0400
> > > To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > > Subject: RE: [Digital BW] Re: refilling MISPRO cart for the Epson
> 2200 (still
> > > more)
> > >
> > > It was my impression that the long snaking channel is only to
> reduce
> > > evaporation of the ink.
> > > On the clear carts, there is no sponge on the plug side, so
> evaporation
> > > would happen even quicker if there were a ³vent² on that side,
> hence the
> > > need to get a good seal there.  The sponge side has the long
> channel vent.
> > >
> > > John
> >
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>