Digital BW, The Print

Cheers.  I need to roll off a lot of paper.  But I need to get a bigger
brush first.  My little brush was fine for 13x19in paper a sheet at a time
but isn't going to cut it on a long piece of roll paper...


> From: chipcarterdc <chipcarterdc@...>
> Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Date: Thu, 08 Dec 2005 19:00:42 -0000
> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Subject: [Digital BW] Re: Roll Paper and flaking
> 
> I do unroll it, but not through the printer.  Rather, I unroll
> significantly more than I'm going to use from the roll (with the paper
> laying on top of the printer), brush it off, then roll it back up, THEN
> feed it through the printer.  I would not want to be putting fine art
> paper through the rollers more than once.  The more things that touch
> the paper, the more likely it is to be scratched or scuffed.
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Steve Kale"
> <stevekale@b...> wrote:
>> 
>> How are you guys dealing with flaking on roll paper (eg HPR)?  Do you
> pull a chunk through the machine, brush it down and then wind it back?
> I'm worried about all that movement through the rollwers etc.  (Epson
> 4800)
>> 
>> Cheers
>> 
>> Steve
>>