Digital BW, The Print

Ginny,

I have a 4000 (not a 2400) and find Museo II feeds fine from the back 
slot.  I use a custom paper width setting of 0.7mm in the Epson 
driver.  Also, Museo II doesn't perform very well using the EEM 
setting on my 4000.  The Textured Fina Art setting lays down less ink 
than the EEM setting and gives me much better Dmax and color gamut.

Hopefully, this is relevant to your 2400.

Lou

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "ginnylady33" 
<ginnylady33@...> wrote:
>
> I just tried Museo II, 250 gsm. for the first time in my relatively
> new 2400. For the most part, the paper will not feed from the rear 
feeder.
> (About 1 out of 6 times the paper will feed into the printer)
> 
> I'm wondering what settings those of you who have tried Museo II in 
a
> 2400 use? 
> What paper do you set the media type for in the driver? 
> Should I be using the 'thick' setting for 250 GSM. paper? 
> Should I be using the front single-sheet feeder?
>  
>  Basically, I'm not sure if there is a problem with my printer, the
> settings or the paper itself. By the way, for media type I was 
trying
> Enhanced Matte and then Heavyweight Matte. (BTW, Enhanced Matte 
paper
> itself feeds just perfectly.)
> 
>  Thanks
>  Ginny
>