Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

Re: Velvet Fine Art Still Not Selectable.

2006-08-11 by mxgo95747

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Kevin" <vinke@...> wrote:
>
> I tried #1 and it did not seem to work. i have tried different print settings and it does 
not 
> work.
> 
> I'm not sure just what you mean w/ #2? 

I use a Mac:

  You shut the regular paper loader and then open the rear paper loader.  Also, I forgot to 
mention that you have to set up the "page set up"  dialogue box as follows:

A;  Format:  Stlylus Photo 2400
B.  Paper Size;  Using Super B (13 x 19) as an example;
     select "Super B (13 x 19) >scroll down to Super B (13 x 19) manual - roll
     {Note; it has to be set to manual - roll}

C.  on the Print Box;  check to make sure thar "Page Setup" shows "manual - roll"
D.  Select VFA or any paper that was previously greyed out.

I think that is about it.  I went through the same problems;

When you insert the paper make sure that you push it down until it stops.  With me, the 
VFA 13 x 19 paper works most of the time.  But some times, I have to keep shoving the 
paper down several times for it to catch properly.  But do as Clayton Jones, suggests, put a 
slight curl on the leading edge to help the paper along.

Martin






There is a top front lid that folds down, but is this 

> > 
> > 2)  Close the front paper loader>open the second from the front paper loader.
> > 
> > That has worked for me.
> > 
> > Martin
> >
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.