Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@y..., "frankg_photo" <frank@f...> 
wrote:
> Can the CFS carts (1160) from MIS be cleaned out ?
> 
> I had an incorrect inkset delivered and 2(C & M)of the 4 inks are 
> going to be exchanged.
> 
> However, I'd already filled the carts and I had to suck the 2 inks 
> back up the tubes with a syringe. I could get most of it out but 
> there's a wee bit left.
> 
> I had not yet installed the carts and punctured the bottom seals. I 
> had top filled via the tubes and vacuum method so the bottoms are 
> intact.
> 
> If I am replacing the C & M inks and there is a little left in 
their 
> chambers is it best to just leave it and let it mix until it is 
> exhausted ? What would you recommend ?
> 
> Also, can the tubes be removed from the carts and flushed and 
> reattached - with heat or ?
> 
> thanks in advance for any tips