Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Eric Miner" <eminer1254@...> 
wrote:

> I've been using Moab's Kayenta (205gsm) on my Epson R200 for BO 
> printg. I recently got some Entrada natural so that I could put my 
> images on a cotton based paper.
> 
> When I began my printing run I ran into a problem. The printer either:
> 
> 1. gives me a "paper jam" error message or
> 2. gives me a "media not loaded correctly" error message or
> 3. simply passes the paper through without printing (this happens 
> less often than #1 or #2)

I have 2 R220s and neither has presented any problems like you mentioned with papers 
under 330 or so gsm.  I've not used the Entrada but I'm wondering if too thin may be a 
problem.  Epson's EEM which feels like a very low 200s gsm paper comes packaged with a 
very heavy "backing" sheet which is advised to put behind single sheets when feeding single 
sheets.  If you have some very heavy paper you might try putting a sheet under the fed paper.