Digital BW, The Print

Here's a wacky trick that often works for me (I also use Entrada 190
gsm in a E200): form feed an 8-1/2x11 sheet of fine sandpaper through
the printer a few times. This puts enough of a tooth on the rollers
that feeding works better. 

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Eric Miner"
<eminer1254@...> wrote:
>
> Hello,
> 
> I've been using Moab's Kayenta (205gsm) on my Epson R200 for BO 
> printg. I recently got some Entrada natural so that I could put my 
> images on a cotton based paper.
> 
> When I began my printing run I ran into a problem. The printer either:
> 
> 1. gives me a "paper jam" error message or
> 2. gives me a "media not loaded correctly" error message or
> 3. simply passes the paper through without printing (this happens 
> less often than #1 or #2)
> 
> For a few sheets I have been able to use a fine nail file to 'bevel' 
> the feeding edge, but that only works about half the time.
> 
> Has anyone see this issue and what can I do to use this paper? Any 
> and all advice greatfully accepted.
> 
> Thanks in advance
> 
> Eric
>