Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "David H. Miller" 
<daveinmoscow@...> wrote:
>
> I'd like to use Epson Enhanced Matte in my R2400 for some panoramics
> with Piezography (which works beautifully for me), but can't find 13
> inch roll paper.
> 
> Has anyone tried having a larger, e.g. 24 inch roll cut into 13 and 11
> inch rolls?  And if so, who, what and where?   The only guillotine
> cutter a friend has can't handle this big of a roll.  Or is there a
> special source of 13, or a reason it isn't available?
> 
> I figure I could print well on both sizes as some of the pans don't go
> beyond 10 inches wide by 30-40 inches.
> 
> Dave
>
 Bought a 32T/inch blade for my hacksaw and used it to cut 13" X50' rolls(4) down to 6.5" 
wide 
for my R2400. Cut edge was a little rough, and since I am trimming edges after printing, it 
was no problem.
Kept the vacuum cleaner handy to keep sawdust(powder) under control. Used an 'A' clamp 
to secure the roll to my work table for cutting.
Had gotten quotes from printing 'Converting' companies for 'slitting' and it was too 
expensive in small quantities.
Good Luck!
Julian Kaiser