Digital BW, The Print

YES! double it over before you clamp!!

Jerry



mike kless wrote:
> 
> Thanks for your reply. When I begin the process the plunger is at the top of
> the syringe, near the tip, and I pull  back on it to begin and then push it
> forward.  There is resistance when I pull the plunger back. I have not
> noticed any movement on the sides of the black cart. I have clamped the tube
> according to the directions on the inkjetart.com website.  By folding it
> over before clamping, are you saying that I should "double it over" and then
> clamp?  I look forward to your response.  Mike
> 
> >From: "Barry Kelsall" <bktimes@...>
> >Reply-To: DigitalBlackandWhiteThePrint@yahoogroups.com
> >To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> >Subject: RE: [Digital BW] nomorecarts cis
> >Date: Sun, 3 Feb 2002 11:39:39 -0800
> >
> >Are you pumping or sucking? Do you feel resistance when you pull or push
> >the
> >plunger? Can you see the sides of the black cart depress as you suction out
> >the air? Are you properly clamping the tube by folding it before
> >lamping?  -BK
> >
> > > -----Original Message-----
> > > From: mike kless [mailto:mgkless@...]
> > > Sent: Saturday, February 02, 2002 4:05 PM
> > > To: DigitalBlackandWhiteThePrint@yahoogroups.com
> > > Subject: Re: [Digital BW] nomorecarts cis
> > >
> > >
> > > Stock Solutions, aka, Inkjetart.com is the co. that I purchased the cis
> > > from.  It is the same as nomorecarts system.  The tape on the
> > > bottom of the
> > > carts is intact.  I have not touched it.  There are no wholes in
> > > the tape.
> > > I have attempted repeatedly to fill the carts by inserting the
> > > syringe into
> > > the tube for each of the inks.  I have pumped until I can not
> > > hear any air
> > > coming out and then I have pumped some more.  I then use the
> > > clamp that is
> > > provided w/ the system to clamp of the tube.  I then insert the tube
> >into
> > > the ink, put on the cap per the instructions and then release the
> > > clamp.  At
> > > this point the ink should flow right into the tube.  It does not.
> > >  I would
> > > definitely like to get this system to work.  I would appreciate feedback
> > > from those who have successfully installed this system. Thanks,  Boris
> > >
> > > >From: Todd Flashner <tflash@...>
> > > >Reply-To: DigitalBlackandWhiteThePrint@yahoogroups.com
> > > >To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> > > >Subject: Re: [Digital BW] nomorecarts cis
> > > >Date: Sat, 02 Feb 2002 18:44:31 -0500
> > > >
> > > >on 2/2/02 5:48 PM, borismg wrote:
> > > >
> > > > > I have repeatedly tried to fill the carts for my 1270.  They will
> > > > > not fill.  To the best of my knowledge I have followed the
> >directions
> > > > > on the stock solution website.  I have tried filling different
> > > > > chambers, all to no avail.  I have been using the clamps that were
> > > > > sent with the system.  Would appreciate any pertinent feedback.
> > > > > Thanks, Boris
> > > >
> > > >You are trying to use the vacuum method, using the syringe with the
> >flow
> > > >regulators (or whatever they are really called) as in the instruction
> > > >manual? If so, something is off in your technique. Perhaps you
> > > have removed
> > > >tape from some of the holes so that a vacuum within the cart can not be
> > > >made?
> > > >
> > > >You make mention of stock solutions but provide no link. Please provide
> > > >more
> > > >specifics as to the parts you are using and the techniques you are
> > > >employing
> > > >and someone may be able to help.
> > > >
> > > >Todd
> > > >
> > >
> > >
> > >
> > >
> > > _________________________________________________________________
> > > Join the world\ufffds largest e-mail service with MSN Hotmail.
> > > http://www.hotmail.com
> > >
> > >
> > > Please visit the Group Homepage to check the Files, Bookmarks,
> > > Polls and other resources as they are often being updated. The page is
> >at:
> > >
> > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> > >
> > > Please follow these basic guidelines:
> > > - Include your full name with your message.
> > > - Include the address of your website, if you have one.
> > > - As threads develop, trim off excess portions of earlier
> > > messages to keep them short.
> > > - As the topic of a thread changes remember to change the subject
> >header.
> > > - Good manners are required at all time. No personal attacks or
> >"flames."
> > > - Complete your Yahoo profile.
> > > - Before posting a question, search the message archives and the
> > > various resources on the homepage.
> > >
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> >http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> 
> _________________________________________________________________
> MSN Photos is the easiest way to share and print your photos:
> http://photos.msn.com/support/worldwide.aspx
> 
> 
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and other resources as they are often being updated. The page is at:
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or "flames."
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various resources on the homepage.
> 
> 
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/